Annett Hanshaw saying "That's All" 50 different ways-Mickey
From: Lou Judson
Sent: Wednesday, April 25, 2018 5:35 PM
To: [log in to unmask]
Subject: Re: [ARSCLIST] How to REALLY do audio restoration
Amazing. I have put the removed sound together in a stream like that,
sometimes with and sometimes without the silences.
Once I put togther all the removed ums and ahs from 13 hours of Joseph
Campbell radio interviews, and it sounded like a little nonsense song.
On Apr 25, 2018, at 2:27 PM, Nutt, Kevin <[log in to unmask]>
> Then these guys edited the mouth noises back together:
> -----Original Message-----
> From: Association for Recorded Sound Discussion List
> [mailto:[log in to unmask]] On Behalf Of Lou Judson
> Sent: Tuesday, April 24, 2018 5:51 PM
> To: [log in to unmask]
> Subject: Re: [ARSCLIST] How to REALLY do audio restoration
> Me too,but not restoration - I edited hundreds of audiobooks on tape. I
> was extremely good at cutting out mouth noises (as little as 1/16th inch
> on 7.5 IPS tape) and was very happy to move to digital resolution.
> Now magic software does it! I've seen as many as 25,000 mouth clicks per
> hour removed by Izotope RX. Same for record clicks.
> Lou Judson
> Intuitive Audio
> On Apr 24, 2018, at 12:58 PM, Corey Bailey <[log in to unmask]>
>> THX to John Haley for the original link!
>> As one who started in the recording industry when vacuum tubes were still
>> in use (Late 1960's), I can honestly say: "Been there, done that." I have
>> edited many a click and pop from audio tape. And, I used some of his
>> methods for Forensics and Restoration from that era. As equipment became
>> available, mostly single ended noise reduction, I employed it's use as
>> well. I was fascinated by just how much Mr. Davies methods were the same
>> as editing magnetic film ( Wiping oxide from the backing and his editing
>> block was similar to a magnetic film "Sync Block", etc.)
>> Yes, things are much easier today,