Boards do not make noise. It might be a compoment on the board. Your service person should be able to trace it!
OR see the machines on ebay, the one for $149 has a motor problem, probably has a board that works…
2 hours left, no bids yet!
$149 is about one hour’s worth of a tech’s time!.
On Sep 28, 2018, at 1:01 PM, 6295LARGE <[log in to unmask]> wrote:
> Hi Lou
> It's steady state white noise. What if it IS the board?
> On Fri, Sep 28, 2018 at 12:35 PM Lou Judson <[log in to unmask]> wrote:
>> If you want a response, you should add it to the reply to field! :-)
>> What sort of noise? Steady state white noise? Crackly irregular noise?
>> Hard to believe he can’t trace it; at some point it is there and before
>> that point it isn’t. Is it in playback, source monitor, or both? If on
>> playback, it could be the source/tape switches, that happens on my Sony 4
>> track sometimes.
>> I think - not sure - that a deck of that vintage can have compoments
>> replaced on all the boards individually; not needing complete board
>> replacement… and there are units on ebay for $149 to 600 which you could
>> get as a parts donor…
>> Best luck!
>> Lou Judson
>> Intuitive Audio
>> On Sep 28, 2018, at 9:03 AM, 6295LARGE <[log in to unmask]> wrote:
>>> Hello everybody.
>>> I have a TEAC A-2340 which has a noise that my repair guy cannot fix.
>>> been in the business for some 35 year, but cannot trace this noise to its
>>> source. He said it might be the board which no one can fix or replace.
>>> Does that make sense? Can anyone suggest a solution?
>>> Ben Roth
>>> P.S. PLEASE RESPOND TO [log in to unmask]