On 5/5/2019 10:06 PM, Corey Bailey wrote:
> Hi John,
>
> I prefer cassette decks with a dual capstan mechanism for playback. The
> reason is that cassettes, particularly old ones, tend to skew and a dual
> capstan deck will hold azimuth better throughout the length to the tape.
> Some Nakamichi's also have the added feature of a pressure pad lifter.
> If you are going to consider a NAK, be sure and buy one that was built
> post 1982. Dual capstan decks are expensive, even used which, I think,
> is the only way you will find one. The Tascam that you mention is
> current but a good used dual capstan machine will out perform it, hands
> down.
I second Corey's feelings; I find the audible difference between a Nak
and any othe cassette deck is painfully obvious, on tapes of high or low
quality -- even the Tascam, which is the best conventional design I've
heard, doesn't measure up. The Nak's pressure pad lifter puts it into a
whole different category.
Peace,
Paul
> My $0.02
>
> Corey
>
> Corey Bailey Audio Engineering
> www.baileyzone.net
>
> On 5/5/2019 7:19 AM, John Schroth wrote:
>> Hoping to get some input from everyone.
>>
>> I'd like to add a Tascam 122 cassette deck to our inventory. I've been
>> studying up on the different models, reading conflicting reports. Does
>> anyone have recommendations on which of the models they prefer - the
>> original 122, MK-II or MK-III?
>>
>> Thanks in advance for any input.
>>
>> Kind Regards,
>>
>> John Schroth
>>
>
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
|