First, select one channel by double clicking near the bottom of the right channel display, or near the top of the left. Then, go to the Process menu and click on Invert/Flip.
From: Association for Recorded Sound Discussion List [mailto:[log in to unmask]] On Behalf Of 6295LARGE .
Sent: Thursday, November 07, 2019 9:26 PM
To: [log in to unmask]
Subject: [EXTERNAL] Re: [ARSCLIST] Trouble with Edison Diamond Disc
"Reverse the phase'?/ How does one do that in Soundforge?
On Thu, Nov 7, 2019 at 2:03 PM Mickey Clark <[log in to unmask]> wrote:
> The Rachmaninoff record is from 1919 - too early for any Edison lateral.
> numbers 6742-C/6744-A both April of 1919. Edison Needle Cut didn't come
> along till 1929.
> As for cartridge wiring, I have my cartridge wired normally. I know that
> when I reverse the phase in my computer, the sound will be proper.-Mickey
> Mickey Clark
> 710 Westminster Avenue West
> Penticton BC
> V2A 1K8
> -----Original Message-----
> From: Henri Chamoux
> Sent: Thursday, November 07, 2019 9:11 AM
> To: [log in to unmask]
> Subject: Re: [ARSCLIST] Trouble with Edison Diamond Disc
> Same idea here, with a prototype disc from the (British) Gramophone
> Company... it is vertical cut and center start:
> Henri CHAMOUX
> The many adventures of the Archeophone phonograph :
> Le 07/11/2019 à 17:47, Lou Judson a écrit :
> > I don’t do disc, only tape, but a though occurs - why not try it with a
> > stereo cartridge wired for stereo and look at the waveform? Maybe that
> > is not vertical?
> > <L>
> > Lou Judson
> > Intuitive Audio
> > 415-883-2689
> >> On Nov 7, 2019, at 7:52 AM, 6295LARGE . <[log in to unmask]> wrote:
> >> The cartridge is wired out of phase. That's why most of the other EDDs
> >> play beautifully.
> >> Thanks,
> >> Ben
> >> On Wed, Nov 6, 2019 at 5:34 PM Dennis Rooney <[log in to unmask]
> >> <mailto:[log in to unmask]>>
> >> wrote:
> >>> Dear Ben,
> >>> Is your M44 stereo cartridge wired out-of-phase? It has to be that way
> >>> to
> >>> ensure optimal vertical pickup.
> >>> DDR