"Reverse the phase'?/ How does one do that in Soundforge?
On Thu, Nov 7, 2019 at 2:03 PM Mickey Clark <[log in to unmask]> wrote:
> The Rachmaninoff record is from 1919 - too early for any Edison lateral.
> numbers 6742-C/6744-A both April of 1919. Edison Needle Cut didn't come
> along till 1929.
> As for cartridge wiring, I have my cartridge wired normally. I know that
> when I reverse the phase in my computer, the sound will be proper.-Mickey
> Mickey Clark
> 710 Westminster Avenue West
> Penticton BC
> V2A 1K8
> -----Original Message-----
> From: Henri Chamoux
> Sent: Thursday, November 07, 2019 9:11 AM
> To: [log in to unmask]
> Subject: Re: [ARSCLIST] Trouble with Edison Diamond Disc
> Same idea here, with a prototype disc from the (British) Gramophone
> Company... it is vertical cut and center start:
> Henri CHAMOUX
> The many adventures of the Archeophone phonograph :
> Le 07/11/2019 à 17:47, Lou Judson a écrit :
> > I don’t do disc, only tape, but a though occurs - why not try it with a
> > stereo cartridge wired for stereo and look at the waveform? Maybe that
> > is not vertical?
> > <L>
> > Lou Judson
> > Intuitive Audio
> > 415-883-2689
> >> On Nov 7, 2019, at 7:52 AM, 6295LARGE . <[log in to unmask]> wrote:
> >> The cartridge is wired out of phase. That's why most of the other EDDs
> >> play beautifully.
> >> Thanks,
> >> Ben
> >> On Wed, Nov 6, 2019 at 5:34 PM Dennis Rooney <[log in to unmask]
> >> <mailto:[log in to unmask]>>
> >> wrote:
> >>> Dear Ben,
> >>> Is your M44 stereo cartridge wired out-of-phase? It has to be that way
> >>> to
> >>> ensure optimal vertical pickup.
> >>> DDR