I have Adobe Audition, DC 10.6, Pro Tools, Reaper, Samplitude & Sound
Forge installed & I'm 'hands on' familiar with a few others.
Too much software, too little time.
Corey Bailey Audio Engineering
On 10/21/2020 2:24 PM, Joe Salerno wrote:
> What other DAWs to you use, Bailey?
> Joe Salerno
> On 10/21/2020 12:40 PM, Corey Bailey wrote:
>> I have found the "suggest" box in RX7 Advanced to be handy for a
>> number of things.
>> That said, I agree with Gary Galo that a phase meter in Izotope RX
>> would be nice. Although I was introduced to RX as a plug-in (before
>> RX had numbers), I now use it stand alone. I have given Izotope a
>> number of what I thought were useful suggestions and, aside from a
>> return email saying what a good suggestion it was, nothing has been
>> implemented. I stopped sending suggestions.
>> RX is only one of a half dozen, or so, DAW's that I use.
>> Corey Bailey Audio Engineering
>> On 10/21/2020 9:35 AM, Lou Judson wrote:
>>> An easier fix for RX azimuth is to run the “suggest” box on the
>>> first few minutes, then run it in the suggested correction…
>>> BUT I use it comonnly with dynamic correction and have never had
>>> this problem. I have RX7 adv.
>>> Lou Judson
>>> Intuitive Audio
>>>> On Oct 21, 2020, at 9:07 AM, Gary A. Galo
>>>> <[log in to unmask]> wrote:
>>>> The "fix" is to clone the first band of the record, so it appears
>>>> twice in the file. Once the azimuth corrector hits the repeat of
>>>> that band, it's locked in and the entire side is fine.