Is the VR II a mono cart? If so, what is the difference between
a mono cart, and a stereo cart summed to mono in the DAW?
----- Original Message -----
From: "Association for Recorded Sound Discussion List"
<[log in to unmask]>
To:<[log in to unmask]>
Sent:Sat, 30 Jan 2021 16:03:42 -0800
Subject:Re: [ARSCLIST] VRII a necessary option
Ben- The mottled surface you can see on laminated discs is the
Using a stereo cartridge doesn't work so well if you have any
Something I have tried with the VRII is have the stylus a little
meaning that it doesn't have to be between the poles but just below
It reduces the output a little if it is too much for a direct
the phono on an amplifier. I use a Heathkit WA P-2 preamp tube amp so
accepts the higher input level.
I wonder if an assembly could be made with a 3D printer for the
From: Benjamin Roth-Aroni
Sent: Saturday, January 30, 2021 1:29 PM
To: [log in to unmask]
Subject: Re: [ARSCLIST] VRII a necessary option
I've also noticed that certain records sound terrible when played
stereo cartridge no matter which stylus I use.
Then I tried the VRii and the RPJ-047 which also sounded better. The
usually has a 2.5 mil and the RPJ-047 has a 3 mil.
Some old Columbia records give a slight warped sound with a stereo
cartridge, but not with either GE cartridcge.
On Sat, Jan 30, 2021 at 2:48 PM Mickey Clark <[log in to unmask]>
> Hi-Benjamin Roth-Aroni I am finding that some records played with a
> cartridge are really noisy. When I try the same record with same
> on the VRII the record tracks perfectly. I've run into this
> and the VRII is my go-to for difficult records.
> I would like to suggest that a manufacturer re-think the stylus for
> cartridge and modernize it. A reliable self centering would be an
> The cartridges will still work a hundred years from now - I'd like
> modernized stylus for this amazing cartridge. - Mickey Clark
> Mickey Clark
> 710 Westminster Avenue West
> Penticton BC
> V2A 1K8
Email sent using Optus Webmail