LISTSERV mailing list manager LISTSERV 16.0

Help for ARSCLIST Archives


ARSCLIST Archives

ARSCLIST Archives


[email protected]


View:

Message:

[

First

|

Previous

|

Next

|

Last

]

By Topic:

[

First

|

Previous

|

Next

|

Last

]

By Author:

[

First

|

Previous

|

Next

|

Last

]

Font:

Monospaced Font

LISTSERV Archives

LISTSERV Archives

ARSCLIST Home

ARSCLIST Home

ARSCLIST  November 2021

ARSCLIST November 2021

Subject:

Re: Brittle Acetate Tapes (was 220V/50Hz 1/4" Open Reel Audio Playback Decks)

From:

Abhimonyu Deb <[log in to unmask]>

Reply-To:

Association for Recorded Sound Discussion List <[log in to unmask]>

Date:

Mon, 22 Nov 2021 10:00:44 +0000

Content-Type:

text/plain

Parts/Attachments:

Parts/Attachments

text/plain (267 lines)

Hi Tim and Richard,
Tim, the Lafayette tapes were recorded on a Wollensak recorder. I'm afraid I don't know much more than that. However, I suspect that the tracks 2 and 3 vs. tracks 1 and 4 issue is due to lack of maintenance of the recorder during the 4 or 5 years that the recordings were made rather than any compatibility issue between different formats.
That's because the tracks issue isn't consistent across all of the tapes.
There's another factor that might be significant. Like I said, I am of Indian origin. My uncle (father's brother) went to the U.S. as a graduate student in 1958 and came back to India in 1960, bringing the Wollensak and 12 Lafayette blank tapes with him. At the time, it was almost as if he brought a spaceship from Mars!
My father says that they never demagnetized the heads. They did clean the heads regularly but sometimes it was with aftershave lotion (gasp!) or something similar.
The tapes are numbered 1 to 12 and were recorded mostly in that sequence.
If I had to find a pattern, it would be that the earlier recorded tapes are generally better on track 1 and later tapes are generally better on track 2. 
Richard, I had read about your experience with the carbonyl iron tape in one of your papers a year or two ago (or maybe on your blog?). I tried your solution myself more than once, also with varying degrees of success.
From my experience, I can't find any pattern to the cupping problem. Could it be a maintenance issue? There was no cupping problem at all with the EMI acetates in Gramophone Company of India's archive. 
On the other hand, I have seen this problem consistently on tapes from other sources and of varying brands that were not well maintained. My Lafayette tapes have no cupping problem at all. They were just kept on a bookshelf (in their boxes) for the past 50 years.
The whole subject is really mysterious and so much fun!
Best wishes,
Abhi
--------------------------------------------


Abhimonyu DebAudio Consultant and Digitization Specialisthttps://www.linkedin.com/in/abhimonyudeb
 

    On Sunday, 21 November, 2021, 11:48:43 pm IST, Richard L. Hess <[log in to unmask]> wrote:
 
 Hi, Abhi and Tim,

Great discussion. The cupping is a real issue, but so is edge waviness.

On the suggestion of Friedrich Engel (retired BASF Historian), I once
reviewed the only carbonyl iron tape I've ever seen. This was one of the
first Magnetophon experimental tapes from circa 1935. It was so badly
cupped that it was like a carpenter's steel tape and could support
itself extending from the reel.

Hydration was Herr Engel's suggestion, I tried about 24 hours with the
tape in a pancake form on a support over about an inch of water in a
sealed container. It ran beautifully and was more like a satin ribbon
than a tape measure.

HOWEVER, I have repeated that once or twice since with far less success.
The hydration probably reduces the strength of the tape.

The worst over-hydration I've ever seen was a damp 1-inch Scotch 201
acetate tape. The acetate had swollen so much that the first half inch
at the hub had been deformed and the closest layers had been forced
through the slot of the hub, causing a bump. Of course it was worse on
the track one side (which was recorded while only about five tracks had
been used) and the tape had been wound tails out so the pack was tight
and the first song of the album was most damaged!

I put a pressure pad hard against the head (while adding extra pressure
to the pinch roller to keep the tape on speed). My hands were very
cramped a half hour later. Then Paul MacDonald from Cape Breton Island,
Nova Scotia who is a musician and excellent recording/mastering
engineer, spent days with it picking out a similar piece of music to
cover the bumps using Sound Blade software. It turned out beautifully.

If the edges are wavy, then certainly tracks 2 and 3 would be a better
choice, if the cupping is tamable.

It is such a difficult line to draw between doing no harm to the
original and capturing the best possible transfer which will likely be
the last transfer made (unless you really miss the mark). If you are
doing risky procedures, it is important to inform the clients about the
problems and risks before proceeding.

Cheers,

Richard


On 2021-11-21 4:55 a.m., Tim Gillett wrote:
> Hi Abhi,
>
> I suspect your experience with the old acetates is common. When
> brittle they can break easily but at least they break cleanly and
> can  be spliced back together again. The other issue which is common
> is "cupping" on the oxide side. The top and bottom edges of the tape
> are OK on the tape head but the centre section doesnt want to sit flat
> so the sound is often muffled or weak. We can increase the tape
> tension across the head but it risks breaking the tape.  Sometimes
> a temporary felt pressure pad, or small artist's brush, or even a
> fingertip as you did can be used to press the centre section against
> the head.
>
> The problem you mentioned with the Lafayette acetates could be that
> they were recorded on a Brush Soundmirror machine which only recorded
> in the centre of the tape, leaving the top and bottom edges
> unrecorded. A "cupped" acetate tape is the worst for this as it keeps
> that most important part of the tape off the head. The reason the
> Studer machine didnt play them well is probably that it was an NAB
> half track machine which would have missed the centre part of the
> tape. You're right that tracks 2 and 3 of a quarter track machine
> would read it much better.   Actually a very good playback can be
> obtained from a Soundmirror tape with a four track (four channel) 1/4"
> head  using tracks 2 and 3.
>
> Best wishes,
>
> Tim Gillett
>
> Perth, Western Australia
>
> ----- Original Message -----
> From: "Association for Recorded Sound Discussion List"
> <[log in to unmask]>
> To:<[log in to unmask]>
> Cc:
> Sent:Sun, 21 Nov 2021 04:58:17 +0000
> Subject:Re: [ARSCLIST] 220V/50Hz 1/4" Open Reel Audio Playback Decks
>
>  Hi Richard,
>  Wow! You have no idea what it means for a little guy like me to
> contribute to this forum!
>  First, just a very quick background. Although I was born and brought
> up in the U.S., I spent all of my adult and professional life in India
> (I am of Indian origin).
>  I used to work in the recording studio of the Gramophone Company of
> India. It used to be a wholly owned subsidiary of the GC of UK. Later
> it became independent.
>  GC of India has a tape archive with acetates starting from around
> 1955. They are almost entirely EMI tapes and are in excellent
> condition. There’s no problem of brittleness and they play fine on
> A80’s and 807’s.
>
>  Now I work independently, usually with smaller archives or individual
> collections. The name brand tapes that I get, e.g. Scotch 111 or
> 141, usually play fine on my A807. However, given the tropical
> climate in India and the lack of maintenance of the tapes, warping is
> a frequent problem.
>  A few years ago, I inherited a dozen Lafayette brand tapes from my
> uncle. The tapes were purchased in 1960 and recorded between 1961 to
> 1965.
>  These tapes are mostly brittle. Instead of A807, for most of these
> tapes I had to use an Akai GX-4000D quarter track deck to play half
> track recordings. Yes, I know I broke every rule in the book but I
> couldn't think of any other way.
>  Interestingly, for some of these tapes played on the Akai, I got a
> better playback from tracks 2 and 3 compared to tracks 1 and 4. Of
> course, I had to reverse them on my DAW.
>  A few years ago I got an acetate similar to your Vermont tape. I
> actually had to unwind several hundred feet of tape from the reel,
> somehow thread the tape onto my Akai without any reels on either side,
> and hold my index finger softly against the playback head while
> playing.
>  So, basically, the brittle acetates that I've encountered are due to
> lack of maintenance or a cheap brand of tape.
>  Coming back to Dave's original post, I was thinking to myself when I
> first read it that it might be nearly impossible to find a machine
> that can satisfy all of his conditions. But, then, I don't have any
> experience with the ATR 100 or APR-5000.
>
>  Best wishes,
>  Abhi (short for Abhimonyu)
>  ------------------------------------------
>
>  Abhimonyu DebAudio Consultant and Digitization
> Specialisthttps://www.linkedin.com/in/abhimonyudeb
>
>  On Saturday, 20 November, 2021, 09:53:59 pm IST, Richard L. Hess
> <[log in to unmask]> wrote:
>
>  Hi, Abbimonyu,
>
>  This issue comes up in regard to many different machines. When I had
> my
>  A80s, I used them for acetate tapes on a regular basis. I haven't
> used
>  an A807 for a long time (as I preferred the A810 over the A807 for
> many
>  reasons, and the A80 over the A810).
>
>  In many respects, I think that the Sony APR-5000 is the gentlest of
> the
>  list I posted. On the  other hand, I had no bad feedback from the
> two
>  A807s (refurbished by Roger Ginsley) that were sold into an archiving
>
>  project in Pakistan to use alongside their Tascam BR-20s (which I did
>
>  not suggest for the current project because many versions were not
> made
>  with power supply voltage selection).
>
>  However, to answer Tim Gillette's rephrasing of the question, we
> might
>  consider machines that start the capstan motor when going into play
> so
>  you are not banging the stopped tape into the full-speed capstan. The
>
>  Sony APR-5000 works that way and mutes the audio for a short period
> of
>  time at startup.
>
>  You weren't missing something and it is good that you posted. Perhaps
> I
>  didn't provide enough weight to that criteria.
>
>  I'd be interested in hearing more about the fragile acetate tapes
> that
>  you encounter as I've been surprised at how well the Scotch 111 and
>  Audio Devices acetate tapes have held up. I've even been pleased with
>
>  the paper tapes I've transferred as well. The only really fragile
>  acetate tape I've come across was one that sat behind a wood stove
>  through several Vermont winters. One face was welded together and
> broke
>  on ever rotation of the supply reel.
>
>  The one thing that seems to fail for me are splices onto paper
> leader. I
>  have to remake all those splices after baking in many instances, but
>  that's with back-coated polyester tapes.
>
>  Cheers,
>
>  Richard
>
>  On 2021-11-19 8:41 p.m., Abhimonyu Deb wrote:
>  > Given the notable list of people who have replied so far, normally
> I would keep my mouth shut.
>  > However, I do think everyone is missing an important point.
>  >
>  > Dave mentions that the machine should be able to play fragile
> acetate tapes. The A80’s, 807’s and Otari 5050’s that I’ve
> worked with would fail miserably here unless I’m missing something.
>  > Abhimonyu Debhttp://linkedin.com/in/abhimonyudeb
>  >
>  >
>  >
>  > On Saturday, November 20, 2021, 6:42 AM, James Perrett
> <[log in to unmask]> wrote:
>  >
>  > On Sat, 20 Nov 2021 at 00:55, Richard L. Hess
> <[log in to unmask]>
>  > wrote:
>  >
>  >>
>  >> Long ago, a company I think called
>  >> "DarkLab" in Germany made EIA to DIN adapters out of plastic.
>  >>
>  >>
>  > They still make them and sell them on Ebay. I bought some a few
> months ago
>  > but haven't used them yet.
>  >
>  > James.
>  >
>
>  --
>  Richard L. Hess                  email:
> [log in to unmask]
>  Aurora, Ontario, Canada                            647
> 479 2800
http://www.richardhess.com/tape/contact.htm
>  Track Format - Speed - Equalization - Azimuth - Noise Reduction
>  Quality tape transfers -- even from hard-to-play tapes.
>
> -------------------------
> Email sent using Optus Webmail
>

--
Richard L. Hess                  email: [log in to unmask]
Aurora, Ontario, Canada                            647 479 2800
http://www.richardhess.com/tape/contact.htm
Track Format - Speed - Equalization - Azimuth - Noise Reduction
Quality tape transfers -- even from hard-to-play tapes.
  

Top of Message | Previous Page | Permalink

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

March 2024
February 2024
January 2024
December 2023
November 2023
October 2023
September 2023
August 2023
July 2023
June 2023
May 2023
April 2023
March 2023
February 2023
January 2023
December 2022
November 2022
October 2022
September 2022
August 2022
July 2022
June 2022
May 2022
April 2022
March 2022
February 2022
January 2022
December 2021
November 2021
October 2021
September 2021
August 2021
July 2021
June 2021
May 2021
April 2021
March 2021
February 2021
January 2021
December 2020
November 2020
October 2020
September 2020
August 2020
July 2020
June 2020
May 2020
April 2020
March 2020
February 2020
January 2020
December 2019
November 2019
October 2019
September 2019
August 2019
July 2019
June 2019
May 2019
April 2019
March 2019
February 2019
January 2019
December 2018
November 2018
October 2018
September 2018
August 2018
July 2018
June 2018
May 2018
April 2018
March 2018
February 2018
January 2018
December 2017
November 2017
October 2017
September 2017
August 2017
July 2017
June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003

ATOM RSS1 RSS2



LISTSERV.LOC.GOV

CataList Email List Search Powered by the LISTSERV Email List Manager