Print

Print


But just as a test, turn the monitor off during the record process, and then
see what results that had on your recording. If the buzz goes away, you know
what path you must follow.

js

----- Original Message -----
From: "Robert Hodge" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, September 15, 2005 9:54 AM
Subject: Re: [ARSCLIST] Reducing soundcard/circuit noise


> Nigel,
>
> A good test of this would be to try moving the monitor to a different
> location, keeping it as far away from any other devices as possible.
> I'd recommend replacing it as soon as you can if it makes a difference
> !!
>
> Best Of Luck !!
>
> Bob
>
> Robert Hodge,
> Senior Engineer
> Belfer Audio Archive
> Syracuse University
> 222 Waverly Ave .
> Syracuse N.Y. 13244-2010
>
> 315-443- 7971
> FAX-315-443-4866
>
> >>> [log in to unmask] 09/15/05 7:44 PM >>>
> Dear Robert
>
> I am (unfortunately?) using a CRT monitor...
>
> Regards,
>
> Diederick
> ----- Original Message -----
> From: "Robert Hodge" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Thursday, September 15, 2005 6:55 AM
> Subject: Re: [ARSCLIST] Reducing soundcard/circuit noise
>
>
> > If you are using a CRT monitor, the high voltage sweep and switching
> > power supply  circuitry can generate all sorts of electromagnetic
> > interferance that can be inductively coupled to anything in
> proximity..
> > Absolutely !!
> >
> > Best !!
> >
> > Robert Hodge,
> > Senior Engineer
> > Belfer Audio Archive
> > Syracuse University
> > 222 Waverly Ave .
> > Syracuse N.Y. 13244-2010
> >
> > 315-443- 7971
> > FAX-315-443-4866
> >
> >>>> [log in to unmask] 09/15/05 9:43 AM >>>
> > Is the sound card inside the PC case or is it external?  Unless
> > properly
> > shielded any internal card (and cables) are prone to induced
> > interference from the rather audio-hostile world of the computer.
> >
> > Nigel
> >
> > Nigel Bewley
> > British Library Sound Archive
> >
> > -----Original Message-----
> > From: Association for Recorded Sound Discussion List
> > [mailto:[log in to unmask]] On Behalf Of D Basson
> > Sent: 15 September 2005 23:15
> > To: [log in to unmask]
> > Subject: [ARSCLIST] Reducing soundcard/circuit noise
> >
> > Dear Group members
> >
> > I recently bought a Dell Optiplex GX620 computer with Windows XP.  I
> > use
> > a Terratec DMX6Fire soundcard.  When I make recordings using Adobe
> > Audition or Wavelab, I get a buzzing noise -  a problem I have never
> > had
> > with my previous computer. Can anyone perhaps help me solve the
> > problem?
> >
> > Kind regards,
> >
> > Diederick Basson
> >
> >
> **************************************************************************
> >
> > Experience the British Library online at www.bl.uk
> >
> > Help the British Library conserve the world's knowledge. Adopt a
> Book.
> > www.bl.uk/adoptabook
> >
> > The Library's St Pancras site is WiFI - enabled
> >
> >
> **************************************************************************
> >
> > The information contained in this e-mail is confidential and may be
> > legally privileged. It is intended for the addressee(s) only. If you
> are
> > not the intended recipient, please delete this e-mail and notify the
> > [log in to unmask] : The contents of this e-mail must not be disclosed
> > or copied without the sender's consent.
> >
> > The statements and opinions expressed in this message are those of
> the
> > author and do not necessarily reflect those of the British Library.
> The
> > British Library does not take any responsibility for the views of
> the
> > author.
> >
> >
> **************************************************************************
>