Hello Richard No. I came across this while surfing B&H. To shoot flat art I use the procedure described earlier. David L ----- Original Message ----- From: "Richard L. Hess" <[log in to unmask]> To: <[log in to unmask]> Sent: February 07, 2006 11:09 AM Subject: Re: [ARSCLIST] Copying LP covers > At 03:45 PM 2/7/2006, David Lewiston wrote: >>If the other solutions aren't suitable, take a look at this Testrite Copy >>Stand. >> >>http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=53762&is=REG&addedTroughType=search > > David, do you have one of these? I do and the arm is very prone to > vibration. The lights are OK, but the arm needs more > reinforcement...someday. It's just a flat piece of steel, no angle or rib > or anything. Think TWANG.....at least on the one I have.