Print

Print


For what it's worth, I did use WAV reverse to play "Revolution #9" backwards. No hidden messages, 
just the too-long nonsense in reverse.

-- Tom Fine

----- Original Message ----- 
From: "Scott Phillips" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, December 17, 2006 2:09 PM
Subject: Re: [ARSCLIST] InSearchOf: Batch Editor to REVERSE WAV files


My understanding was the former to allow for one pass digitizing of
stereo 1/4 track 1/4" tape, or similar bi-directionally recorded
materials.

I own the newest version of Sound Forge, but I've never tried batch
reversal, only sample rates and the like. Let me try it and see... If
'John is dead..'

Scott Phillips

-----Original Message-----
From: Association for Recorded Sound Discussion List
[mailto:[log in to unmask]] On Behalf Of Steven C. Barr(x)
Sent: Saturday, December 16, 2006 8:14 PM
To: [log in to unmask]
Subject: Re: [ARSCLIST] InSearchOf: Batch Editor to REVERSE WAV files

----- Original Message -----
From: "Tom Fine" <[log in to unmask]>
> Newest Sony Soundforge will do batches, too. I don't have it but I
> think the
manual is online. I
> know it will do batch sample-rate-conversion, do not know about
batch-reverse.
>
Does this thread relate to playing sound files backwards (which might be
needed if one played a four-track tape on a commercial stereo deck...?)
...or playing it forward but "upside down" (i.e. inverting the wave form
and playing THAT...?!)

Steven C. Barr
(Note that if the former is true, it should be able to settle a number
of controversies per "secret messages" on Beatles LP's...)