Print

Print


		JOHN F. KENNEDY SPACE CENTER LIBRARY
				DISCARD LIST  D 07-10


The following list of books is from the John F. Kennedy Space Center,
NASA Library and is available to all North American Libraries.  The list
expires 12/19/2007


POC:    [log in to unmask]  
				

 HD4965 .U5 E96P 2005-2006 V.1            1997
    ECS geographic report on professional and scientific personnel
    compensation. Geographic report on professional and scientific
personnel	
    compensation Rochelle Park, N.J. : Watson Wyatt Data Services,
c1996-

HD4965 .U5 E96P 2005-2006 V.2            1997
    ECS geographic report on professional and scientific personnel
    compensation. Geographic report on professional and scientific
personnel 
    compensation Rochelle Park, N.J. : Watson Wyatt Data Services,
c1996-

HF5549.5 .M63 D186 2000                  2000               3 copies
    Daniels, Aubrey C.
    Bringing out the best in people : how to apply the astonishing power
of
    positive reinforcement / Aubrey C. Daniels. New & updated ed.
    New York : McGraw-Hill, c2000. Contributor biographical information

HF5549.5.T7 T768B 1997                   1997
    Kravetz Associates
    Training best practices / Kravetz Associates.
    Bartlett, IL : Kravetz Associates (671 Timber Ridge Drive, Bartlett,
IL 
    60103  630/483-7300), 1995.

 QA76.64 .T455 2005                       2004
    Thomas, David, 1956-
    Programming Ruby : the pragmatic programmers' guide.
    2nd ed. / Dave Thomas with Chad Fowler and Andy Hunt.
    Raleigh, N.C. ; [Great Britain] : Pragmatic Bookshelf, 2004, c2005.
 

QA76.9 .D3 O63E 1999 V.1                 1999
    Oracle8i : Error messages release 8.1.5 /
    Error messages, release 8.1.5 
    Redwood City, Calif. : Oracle Corporation, c1999.

 QA76.9 .D3 O63E 1999 V.2                 1999
    Oracle8i : Error messages release 8.1.5 /
    Error messages, release 8.1.5 
    Redwood City, Calif. : Oracle Corporation, c1999.

 QA76.9 .D3 O63E 1999 V.3                 1999
    Oracle8i : Error messages release 8.1.5 /
    Error messages, release 8.1.5
    Redwood City, Calif. : Oracle Corporation, c1999.

 QA465 .N337 1994                         1994
    NCSL information manual : determining and reporting measurement
    uncertainties : recommended practice : RP-12 / prepared by the Ad
Hoc
    Committee on Measurement Uncertainties, National Conference of
Standards
    Laboratories. 1st ed.
    Boulder, Co. : National Conference of Standards Laboratories, c1994.

 QP303 .W798 1984                         1984
    Wirhed, Rolf.
    Athletic ability & the anatomy of motion / Rolf Wirhed ; translated
by
    A.M. Hermansson. London, England : Wolfe Medical Publications, 1984.

 RC683.5.E94 F926 1989                    1989
    Froelicher, Victor F.
    Manual of exercise testing / Victor F. Froelicher, Gilberto D.
Marcondes.
    Chicago : Year Book Medical Pub., c1989.

 RC925 .S571                              1986
    Siegel, Irwin M., 1927-
    Muscle and its diseases : an outline primer of basic science and
clinical
    method / Irwin M. Siegel. Chicago : Year Book Medical Publishers,
c1986.

T55.3.H3 H428 1982                       1982
    Hazardous materials spills handbook / [edited by] Gary F. Bennett,
Frank
    S. Feates, Ira Wilder. New York : McGraw-Hill, c1982.

T55.3.H3 H428 1986                       1986
    Hazardous chemicals data book / edited by G. Weiss.
    2nd ed. Park Ridge, N.J., U.S.A : Noyes Data Corp., c1986.

 T55.3.H3 H428                            1980
    Hazardous chemicals data book / edited by G. Weiss.
    Park Ridge, N.J. : Noyes Data Corp., 1980.

T55.3.H3 N718 1990                       1990
    NIOSH pocket guide to chemical hazards.
    [Cincinnati, Ohio] : U.S. Dept. of Health and Human Services, Public
    Health Service, Centers for Disease Control, National Institute for
    Occupational Safety and Health ; Washington, D.C. : For sale by the
Supt.
    of Docs., U.S. G.P.O., [1990].

 T55.3.H3 N718 1994                       1994
    NIOSH pocket guide to chemical hazards.
    [Cincinnati, Ohio] : U.S. Dept. of Health and Human Services, Public
    Health Service, Centers for Disease Control, National Institute for
    Occupational Safety and Health ; Washington, D.C. : For sale by the
Supt.
    of Docs., U.S. G.P.O. or NTIS, [1994].

T56.8 .M689P 1970                        1970
    Moder, Joseph J.
    Project management with CPM and PERT [by] Joseph J. Moder [and]
Cecil R.
    Phillips. 2d ed. New York, Van Nostrand Reinhold Co. [1970]

 T57 .S551                                1969
    Shere, Waris.
    Applied mathematics for engineering and science [by] Waris Shere
[and]
    Gordon Love. Englewood Cliffs, N.J., Prentice-Hall [1969]

T57.6 .C777                              1977
    Cooper, Leon, 1924-
    Introduction to operations research models / Leon Cooper, U. Narayan
Bhat,
    Larry J. LeBlanc. Philadelphia : Saunders, 1977.

 T57.83 .W583                             1969
    White, D. J. (Douglas John)
    Dynamic programming / D.J. White.
    Edinburgh : Oliver & Boyd ; San Francisco : Holden-Day, 1969.

 T57.85 .W652                             1969
    Wiest, Jerome D., 1930-
    A management guide to PERT/CPM [by] Jerome D. Wiest [and] Ferdinand
K.
    Levy. Englewood Cliffs, N.J., Prentice-Hall [1969]

 T58 .C596                                1952
    Clark, Wallace
    Gantt chart : A working tool of management. / by Wallace Clark, With
a
    foreward by B. Seebohm Rowntree. 3d ed. London : Pitman, 1952.

 

T58 .E38 V.1                             1959
    EIA Conference on Value Engineering, University of Pennsylvania,
Value engineering, 1959.
    Elizabeth, N. J., Engineering Publishers [c1959-61]

 T58 .E38 V.2                             1959
    EIA Conference on Value Engineering, University of Pennsylvania,
1959.
    Value engineering, 1959.
    Elizabeth, N. J., Engineering Publishers [c1959-61]

 T58 .L334                                1969
    Larson, Gustav A.
    Configuration management / by Gustav A. Larson.
    New York : Merrand Data Systems, Inc., 1969.

 T58 .O13 1999                            1999
    O'Brien, James A., 1936-
    Management information systems : managing information technology in
the
    internetworked enterprise / James A. OoBrien. 4th ed.
    Boston : Irwin/McGraw-Hill, c1999.

T58.64 .S232 2002                        2002
    Santana, Joe.
    Manage I.T. : a step-by-step guide to help new and aspiring IT
managers
    make the right career choices and gain the skills necessary for peak
    performance / Joe Santana & Jim Donovan. Manage IT
    Buckingham, PA : Lahaska Pub., c2002.

 T58.64 .S642 1987                        1987
    Smith, Allen N.
    Information resource management / Allen N. Smith, Donald B. Medley.
    Cincinnati : South-Western Pub. Co., c1987.

 T59.4 .E57R                              1984
    Robotics.
    New York, N.Y., USA : Engineering Information, 1984.

 T59.4 .E57                               1980
    Engelberger, Joseph F.
    Robotics in practice : management and applications of industrial
robots /
    Joseph F. Engelberger. New York : AMACOM, 1980.

 T59.5 .A491                              1962
    Amber, George H.
    Anatomy of automation [by] George H. Amber [and] Paul S. Amber.
    Englewood Cliffs, N. J., Prentice-Hall, 1962.
 T59.77 .W891 1999                        1999
    Wooding, John.
    The point of production : work environment in advanced industrial
    societies / John Wooding, Charles Levenstein.
    New York : Guilford Press, c1999.

 T60.T5 C319T                             1954
    Carroll, Phil, 1895-
    Timestudy for cost control. 3d ed. New York, McGraw-Hill, 1954.

 T60.W6 K18 1977                          1977
    Karger, Delmar W.
    Engineered work measurement : the principles, techniques, and data
of
    methods-time measurement, modern time and motion study, and related
    applications engineering data / Delmar W. Karger, Franklin H. Bayha.
    3d ed. New York : Industrial Press, c1977.

 T60.3 .L438                              1982
    Learning curves : theory and application / edited by Ravinder Nanda
and
    George L. Adler.
    Norcross, Ga. : Industrial Engineering & Management Press, 1982.

 T173.8 .A634 2001                        2001
    Anton, Philip S.
    The global technology revolution : bio/nano/materials trends and
their
    synergies with information technology by 2015 / Philip S. Anton,
Richard
    Silberglitt, James Schneider. Santa Monica, CA : RAND, 2001.

 T173.8 .S862 1999                        1999
    Stix, Gary.
    Who gives a gigabyte? : a survivial guide for the technologically
    perplexed / Gary Stix and Miriam Lacob. New York : John Wiley,
c1999.

 T174.5 .R879                             1977
    Rowe, William D., 1930-
    An anatomy of risk / William D. Rowe. New York : Wiley, c1977.

 T175 .L949 1998                          1998
    Luftig, Jeffrey T.
    Design of experiments in quality engineering / Jeffrey T. Luftig,
Victoria
    S. Jordan. New York : McGraw-Hill, c1998.

 


T353 .C277                               1946
    Carini, Louis Frank Bartholomew, 1911-
    Drafting for electronics, by L. F. B. Carini ...
    1st ed. New York, London, McGraw-Hill Book Company, inc., 1946.

T353 .H694G                              1968
    Hoelscher, Randolph Philip, 1890-
    Graphics for engineers: visualization, communication, and design
[by]
    Randolph P. Hoelscher, Clifford H. Springer [and] Jerry S.
Dobrovolny.
    New York, Wiley [1968]

 T353 .S785 2002                          2002
    Standiford, Kevin
    Engineering drawing and design : Workbook / Kevin Standiford.
    3rd. Edition Albany, NY : Delmar Pub., 2002.

T379 .W181                               1986                     2
Copies
    Walker, John R., 1924-
    Welding print reading / by John R. Walker.
    South Holland, Ill. : Goodheart-Willcox Co., c1986.

T385 .B458W 1992                         1992
    Benedict, Robert C.
    Using Harvard Graphics for Windows / Robert C. Benedict, Jr.
    Carmel, IN : QUE, c1992.

 T385 .B619 2000                          2000
    Birn, Jeremy.
    Digital lighting & rendering / by Jeremy Birn.
    Lighting & rendering Indianapolis, Ind. : New Riders, c2000.

 T385 .B781 1997                          1997
    Bouton, Gary David, 1953-
    Inside Adobe Photoshop 4 / Gary David Bouton ; co-authors, Barbara
Mancuso
    Bouton, Gary Kubicek. Photoshop 4 Inside Adobe Photoshop four
    Photoshop four Limited ed. Indianapolis, Ind. : New Riders Pub.,
c1997.

 T385 .E56 1987                           1987
    Enderle, G. (G*unter), 1944-
    Computer graphics programming : GKS, the graphics standard / G.
Enderle,
    K. Kansy, G. Pfaff.
    Berlin ; New York : Springer-Verlag, 1984.

 T385 .G488                               1978
    Giloi, Wolfgang.
    Interactive computer graphics : data structures, algorithms,
languages /
    Wolfgang K. Giloi.
    Englewood Cliffs, N.J. : Prentice-Hall, c1978.

 T385 .L222                               1984
    Lambert, Steve, 1945-
    Presentation graphics on the Apple Macintosh : how to use Microsoft
Chart
    to create dazzling graphics for professional and corporate
applications /     Steve Lambert.
    Bellevue, Wash. : Microsoft Press ; New York : Distributed in the
U.S. and
    Canada by Simon and Schuster, c1984.

 T385 .R284 1990                          1990
    Campbell, Mary V.
    Harvard graphics made easy / Mary Campbell.
    Berkeley, CA. : Osborne McGraw-Hill, c1990.

 T385 .S129T 1992                         1992
    Sagman, Stephen W.
    Using Harvard graphics 3 / Stephen W. Sagman, Jane Graver Sandlar.
    Carmel, IN : Que, c1992.

 T3301 .M483F 2002                        2001
    Means facilities maintenance and repair cost data : 2002. /
    Kingston, Mass. : R.S. Means Co., c2001.

 T3301 .M483F 2003                        2002
    Means facilities maintenance and repair cost data : 2003. /
    Kingston, Mass. : R.S. Means Co., c2002.

 T3301 .M483F 2003                        2002
    Means facilities maintenance and repair cost data : 2003. /
    Kingston, Mass. : R.S. Means Co., c2002.

 T3301 .M483F 2004                        2003
    Means facilities maintenance and repair cost data : 2004. /
    Kingston, Mass. : R.S. Means Co., c2003.






 TA9 .J76                                 1963
    Engineering encyclopedia : a condensed encyclopedia and mechanical
    dictionary for engineers, mechanics, technical schools, industrial
plants,
    and public libraries, giving the most essential facts about 4500
important  engineering subjects / edited by Franklin D. Jones and Paul
B.
Schubert.     3rd ed.    New York : Industrial Press, c1963.

 TA11 .A748                               1963
    Arnell, Alvin.
    Standard graphical symbols; a comprehensive guide for use in
industry,
    engineering, and science.
    New York, McGraw-Hill [1963]

TA147 .B365                              1967
    Beakley, George C.
    Engineering; an introduction to a creative profession [by] George C.
    Beakley [and] H.W. Leach.   New York, Macmillan [1967]
 
 TA151 .C582H 1995                        1995
    The Civil engineering handbook / editor-in-chief, W.F. Chen.
    Boca Raton : CRC Press, c1995.

 TA151 .E57 1995                          1995
    The Engineering handbook / editor-in-chief, Richard C. Dorf.
    Boca Raton : CRC Press, 1995.

 TA151 .H473 1984                         1984
    Heisler, Sanford I.
    The Wiley engineer's desk reference : a concise guide for the
professional
    engineer / Sanford I. Heisler.
    New York : J. Wiley, 1984.

 TA151 .H631 1985                         1985
    Standard handbook of engineering calculations / Tyler G. Hicks,
editor ;
    S. David Hicks, coordinating editor.     2nd ed.
    New York : McGraw-Hill, c1985.

 TA151 .H631                              1972
    Hicks, Tyler Gregory, 1921-
    Standard handbook of engineering calculations. Tyler G. Hicks,
editor.
    New York, McGraw-Hill [1972]





 TA151 .H886                              1939
    Hudson, Ralph Gorton, 1885-
    The engineers' manual, by Ralph G. Hudson ...
    2d ed.   New York, J. Wiley & Sons, inc.; London, Chapman & Hall,
limited,
1939.

 TA151 .M169                              1957
    McNeese, Donald C.
    Engineering and technical handbook, by Donald C. McNeese and Albert
L.
    Hoag.     Englewood Cliffs, N.J., Prentice-Hall, 1957.

 TA151 .P867 V.1                          1967
    Potter, James Harry.
    Handbook of the engineering sciences. Prepared by a staff of
specialists
    and edited by James H. Potter.
    Princeton, N.J., Van Nostrand [1967]

 TA151 .P867 V.2                          1967
    Potter, James Harry.
    Handbook of the engineering sciences. Prepared by a staff of
specialists
    and edited by James H. Potter.
    Princeton, N.J., Van Nostrand [1967]

 TA151 .S452 V.1                          1957
    Seelye, Elwyn Eggleston, 1884-
    Data book for civil engineers. With special acknowledgment to Morton
C.
    Simmons.     3d ed.  New York, Wiley [1957-

 
TA151 .S452 V.2                          1957
    Seelye, Elwyn Eggleston, 1884-
    Data book for civil engineers. With special acknowledgment to Morton
C.
    Simmons.     3d ed.
    New York, Wiley [1957-

 TA151 .S614 1996                         1996
    Sims, Frank, 1925-   Engineering formulas : conversions,
definitions, and tables / by Frank   Sims.  1st ed.  New York :
Industrial Press, 1996.

 TA153 .C337 1999                         1999
    Case studies in optimal design and maintenance planning of civil
    infrastructure systems / edited by Dan M. Frangopol.
    Reston, VA : Structural Engineering Institute, American Society of
Civil
    Engineers, c1999.


 TA157 .N877                              1985
    Northrup, Herbert Roof, 1918-
    Personnel policies for engineers and scientists : an analysis of
major
    corporate practice / by Herbert R. Northrup and Margot E. Malin.
    Philadelphia, Pa., U.S.A. : Industrial Research Unit, Wharton
School,    University of Pennsylvania, c1985.

 TA157 .T737                              1986
    Toward the more effective utilization of American engineers : the
National   Engineering Utilization Survey.
    Washington, D.C. : American Association of Engineering Societies,
    Engineering Manpower Commission, c1986.

 TA158 .W432                              1995
    Weiss, Ray, 1941- 
    The technical career navigator / Ray Weiss.
    Englewood Cliffs, N.J. : PTR Prentice Hall, 1995.

 TA159 .T945                              1975
    Turner, David Reuben, 1915-
    Civil engineer : senior, associate & administrative / by David R.
    Turner.   3d ed.    New York : Arco, c1975.

 TA160.4 .D598 1987                       1987
    Directions in engineering research : an assessment of opportunities
   And  needs / report of the Engineering Research Board, Commission on
    Engineering and Technical Systems, National Research Council.
    Washington, D.C. : National Academy Press, c1987.

 TA164 .S989                              1968
    Symposium on Thermal Problems in Biotechnology, New York, 1968.
    Thermal problems in biotechnology. Presented at the winter annual
   Meeting  of the American Society of Mechanical Engineers, Dec. 3,
1968.
    New York, American Society of Mechanical Engineers [1968]

TA165 .A287                              1951
    Ahrendt, William Robert, 1919-
    Automatic feedback control [by] William R. Ahrendt [and] John F.
   Taplin.   1st ed.  New York, McGraw-Hill, 1951.

 TA165 .B627 2000                         2000
    Black, Peter, 1951-
    Informatica 1.0 : access to the best tools for mastering the
   Information  revolution / Peter McNaughton Black.    1st ed.
    New York : Random House, c2000.

 TA165 .C415                              1962
    Cerni, Richard H.
    Instrumentation for engineering measurement / R. H. Cerni,  L. E.
Foster.
    New York : Wiley, 1962.

TA165 .C755P                             1957
    Considine, Douglas Maxwell.
    Process instruments and controls handbook. Prepared by a staff of
    specialists; Douglas M. Considine, editor-in-chief.
    New York, McGraw-Hill, 1957.

 TA165 .H613                              1981
    Hewson, John E., 1916-
    Process instrumentation manifolds : their selection and use : a
handbook /
    by John E. Hewson.
    Research Triangle Park, N.C. : Instrument Society of America, c1981.

 TA165 .S683                              1975
    Soisson, Harold E.
    Instrumentation in industry / Harold E. Soisson.
    New York : Wiley, [1975]

 TA166 .D163                              1966
    Damon, Albert, 1918-
    The human body in equipment design [by] Albert Damon, Howard W.
Stoudt
    [and] Ross A. McFarland.
    Cambridge, Harvard University Press, 1966.

 TA166 .W898                              1981
    Woodson, Wesley E.
    Human factors design handbook : information and guidelines for the
design
    of systems, facilities, equipment, and products for human use /
Wesley E.
    Woodson.
    New York : McGraw-Hill, c1981.

 TA167 .R863                              1980
    Rouse, William B.
    Systems engineering models of human-machine interaction / William B.
    Rouse.
    New York : North Holland, c1980.


 TA167 .S571                              1969
    Siegel, Arthur I.
    Man-machine simulation models; psychosocial and performance
interaction
    [by] Arthur I. Siegel and J. Jay Wolf.   New York,
Wiley-Interscience [1969]

 TA168 .B639 1992                         1992
    Blanchard, Benjamin S.
    Logistics engineering and management / Benjamin S. Blanchard.
    4th ed.   Englewood Cliffs, N.J. : Prentice-Hall, c1992.

 TA168 .C226                              1967
    Cannon, Robert H.
    Dynamics of physical systems [by] Robert H. Cannon, Jr.
    New York, McGraw-Hill [1967]

 TA168 .E36 1988                          1988
    Eisner, Howard, 1935-
    Computer-aided systems engineering / Howard Eisner.
    Englewood Cliffs, N.J. : Prentice-Hall, c1988.

 TA168 .H275                              1967
    Hare, Van Court.
    Systems analysis; a diagnostic approach.
    New York, Harcourt, Brace & World [1967]

 TA168 .H458 1994                         1994
    Hee, Kees Max van, 1946-
    Information systems engineering : a formal approach / K.M. van Hee.
    Cambridge ; New York, N.Y. : Cambridge University Press, 1994.

 TA168 .I66                               1966
    Ireson, William Grant, 1914-
    Reliability handbook [by] W. Grant Ireson.
    New York, McGraw-Hill [1966]

 TA168 .W241                              1965
    Walton, Thomas F
    Technical data requirements for systems engineering and support [by]
    Thomas F. Walton. In collaboration with Clare Bull.
    Englewood Cliffs, N. J., Prentice-Hall [1965]






 TA168 .W984M 1993                        1993
    Wymore, A. Wayne.
    Model-based systems engineering : an introduction to the
mathematical
    theory of discrete systems and to the tricotyledon theory of system
design    / A. Wayne Wymore.
    Boca Raton : CRC Press, c1993.

 TA168 .W984                              1977
    Wymore, A. Wayne.
    A mathematical theory of systems engineering--the elements / A.
Wayne
    Wymore.    Huntington, N.Y. : R.E. Krieger Pub. Co., 1977, c1967.

 TA169 .R567 2000                         2000
    Rigdon, Steven E., 1955-
    Statistical methods for the reliability of repairable systems /
Steven E.
    Rigdon, Asit P. Basu.     New York : Wiley, 2000.

 TA174 .B416                              1984
    Begg, Vivienne.
    Developing expert CAD systems / Vivienne Begg.
    New York, NY : UNIPUB, c1984.

 TA174 .B554 1986                         1986
    Besant, C. B.
    Computer-aided design and manufacture / C.B. Besant, C.W.K. Lui.
    3rd ed.   Chichester [West Sussex] : E. Horwood ; New York : Halsted
Press,
   1986.

 TA174 .D584 1990                         1990
    Dinh-Vu, Mach N.
    Programming with user commands / for the MicroStation and Intergraph
   CADD   Systems.   2nd edition.  Melbourne, Australia : Pen and Brush
Publ. ; c1990

TA174 .F264                              1964
    Faupel, Joseph Herman, 1916-
    Engineering design; a synthesis of stress analysis and materials
    engineering [by] Joseph H. Faupel.
    New York, Wiley [1964]

 TA174 .G823                              1966
    The Design method / edited by S. A. Gregory on behalf of Design and
    Innovation Group, University of Aston in Birmingham.
    London : Butterworths, 1966.

 

TA174 .H878 1996                         1996
    Hubka, Vladimir.
    Design science : introduction to needs, scope and organization of
    engineering design knowledge / Vladimir Hubka and W. Ernst Eder.
    Berlin ; New York : Springer, c1996.

 TA174 .J77 1988                          1988
    Jones, James V.
    Engineering design : reliability, maintainability, and testability /
James
    V. Jones.     1st ed.
    Blue Ridge Summit, PA : TAB Professional and Reference Books, c1988.

TA174 .K92 1999                          1999
    Krishnan, G. V.
    Harnessing MicroStation J / G.V. Krishnan, James E. Taylor.
    Albany : Delmar Publishers, c1999.

 TA175.5 .H154 1984                       1984
    Hajek, Victor G.
    Management of engineering projects / Victor G. Hajek.   3rd ed.
    New York : McGraw-Hill, c1984.

TA180 .G618 1989                         1989
    Goldbloom, Joseph, 1908-
    Engineering construction specifications : the road to better
quality,
    lower cost, reduced litigation / Joseph Goldbloom.
    New York : Van Nostrand Reinhold, c1989.

 TA190 .A629                              1965
    Antill, James M.
    Critical path methods in construction practice [by] James M. Antill
[and]
    Ronald W. Woodhead.    New York, Wiley [1965]

 TA190 .P888                              1984
    Powers, Jack.
    Configuration management procedures manual / written by Jack Powers
;    edited by Jerome H. Lieblich.
    1st ed.
    Santa Ana, Calif. : Global Engineering Documents, [1984?]

 TA213 .G796                              1989
    Green, Hilary.
    Managing public equipment / prepared by APWA Research Foundation
;written
    by Hilary Green... [et al.].
    Chicago, IL : APWA, c1989.

 TA213 .I61                               1967
    Introduction to industrial tools, equipment, and supplies.
    Philadelphia, Ames Pub. Co. [1967]

 TA472 .M294 1986                         1986
    Load & resistance factor design : manual of steel construction /
American   Institute of Steel Construction.
    1st ed.   [Chicago, Ill.] : American Institute of Steel
Construction, 1986.

TK5105.73 .C837 1993                     1993
    Costales, Bryan.
    Sendmail / Bryan Costales with Eric Allman & Neil Rickert.
    Sebastopol, CA : O'Reilly & Associates, Inc., c1993.

TL560.25 .A957 1988                      1988
    EA-FAA-T-8080-10BX
    FAA-T-8080-10A
    Aviation mechanic general question book : Including answers,
explanations
    and references. /   Casper, WY : IAP,Inc., 1988.

 TL560.25 .A957A 1988                     1988
    EA-FAA-T-8080-12BX
    FAA-T-8080-12A
    Aviation mechanic airframe question book : Including answers,
   Explanations   and references. /  Casper, WY : IAP,Inc., 1988.

 TL560.25 .A957P 1988                     1988
    EA-FAA-T-8080-11BX
    FAA-T-8080-11A
    Aviation mechanic powerplant question book : Including answers,
    explanations and references. /
    Casper, WY : IAP,Inc., 1988.


Linda Holton-Hamilton
Kennedy Space Center Library
Library-A Acquisitions
Email: [log in to unmask]