Print

Print


The following list of  books is from the John F. Kennedy Space Center,
NASA Library and is available to all North American Libraries.  The list
expires September 10, 2008

POC:  [log in to unmask]

TJ211 .V989                              1982
    Vukobratovic, Miomir.
    Dynamics of manipulation robots : theory and application / M.
    Vukobratovic, V. Potkonjak. Berlin ; New York : Springer-Verlag,
1982.

 TJ211 .V990                              1982
    Vukobratovic, Miomir.
    Control of manipulation robots : theory and application / M.
Vukobratovic,
    D. Stokic. Berlin ; New York : Springer-Verlag, 1982.

 TJ213 .H319                              1969
    Harrison, Howard L.
    Introduction to automatic controls [by] Howard L. Harrison [and]
John G.
    Bollinger. 2d ed. Scranton, International Textbook Co. [1969]

 TJ216 .F831 1990                         1990
    Franklin, Gene F.
    Digital control of dynamic systems / Gene F. Franklin, J. David
Powell,
    Michael L. Workman. 2nd ed. Reading, Mass. : Addison-Wesley Pub.
Co., c1990.

 TJ216 .K96                               1963
    Kuo, Benjamin C., 1930-
    Analysis and synthesis of sampled-data control systems [by] Benjamin
C.
    Kuo. Englewood Cliffs, N.J. Prentice-Hall [1963]

 TJ219 .S849                              1976
    Stewart, Harry L.
    Pneumatics and hydraulics : a revision of Fluid power, by Harry L.
Stewart
    / by Harry L. Stewart. 3d ed. Indianapolis, IN : Howard W. Sams &
Co., c1976.

 TJ223.M53 P222 1988                      1988
    Parallel processing in control : the transputer and other
architectures /
    edited by P.J. Fleming.    London, U.K. : P. Peregrinus on behalf of
the Institution 
    of Electrical Engineers, c1988.

 TJ223.T4 R783                            1969
    Roots, William, K., 1924-
    Fundamentals of temperature control / William K. Roots.
    New York : Academic Press, 1969.

TJ223.V3 B347 1994                       1994
    Baumann, Hans D., 1930-
    Control valve primer : a user's guide / Hans D. Baumann.
    2nd ed. Research Triangle Park, N.C. : Instrument Society of
America, 1994.

 TJ230 .C912 1976                         1976
    Creamer, Robert H.
    Machine design / Robert H. Creamer.
    2d ed. Reading, Mass. : Addison-Wesley Pub. Co., c1976.

 TJ233 .B652                              1963
    Blodgett, Omer W.
    Design of weldments. Cleveland, James F. Lincoln Arc Welding
Foundation [1963]

 TJ255 .A427                              1941
    Allen, John Robins, 1869-1920.
    Heat engines; steam, gas, steam turbines and their auxiliaries, by
John R.
    Allen...and Joseph A. Bursley. 5th edition.
    New York London, McGraw-Hill book company, inc., 1941.

 TJ260 .C738 1985                         1985
    Computational techniques in heat transfer. Volume 1 / edited by R.W.
Lewis
    ... [et al.]. Swansea, U.K. : Pineridge Press, c1985.

 TJ260 .S324                              1959
    Schenck, Hilbert van Nydeck, 1926-
    Heat transfer engineering. Englewood Cliffs, N.J., Prentice-Hall,
1959.

 TJ262 .S255                              1983
    Sauer, Harry J., 1935-
    Heat pump systems / Harry J. Sauer, Jr., Ronald H. Howell.
    New York : Wiley, c1983.

 TJ264 .S587 1992                         1992
    Silverstein, Calvin C.
    Design and technology of heat pipes for cooling and heat exchange /
Calvin
    C. Silverstein. Washington : Hemisphere Pub. Corp., c1992.

 TJ265 .B912                              1969
    Brzustowski, Thomas A.
    Introduction to the principles of engineering thermodynamics [by]
Thomas
    A. Brzustowski. Reading, Mass., Addison-Wesley Pub. Co. [c1969]

 TJ265 .C899                              1968
    Crawford, Franzo H. (Franzo Hazlett), 1900-
    Thermodynamics for engineers [by] Franzo H. Crawford [and] William
D. Van
    Vorst. New York, Harcourt, Brace & World [1968]

 TJ267 .I64 1995                          1995
    Bassaraba, Bruce M.
    IPT's rotating equipment training manual : machinery reliability &
    condition monitoring. / Bruce M. Bassaraba and James A. Archer.
    1st edition Edmonton, Alberta, CA IPT Publishing and Training Ltd.,
1995.

 TJ288 .T173 1991                         1991
    Taplin, Harry, 1935-
    Boiler plant and distribution system optimization manual / by Harry
    Taplin. Lilburn, GA : Fairmont Press ; Englewood Cliffs, NJ :
Distributed by
    Prentice-Hall, c1991.

 TJ415 .K54                               1967
    King, Reno C.
    Piping handbook [edited by] Reno C. King. 5th ed. New York,
McGraw-Hill [1967]

 TJ563 .B954 1990                         1990
    Burger, Robert, 1921-
    Cooling tower technology : maintenance, upgrading and rebuilding /
Robert
    Burger. 2nd ed.
    Lilburn, GA : Fairmont Press ; Englewood Cliffs, NJ : Distributed by
    Prentice-Hall, c1990.

 TJ563 .N277                              1971
    National Association of Corrosion Engineers.
    Cooling water treatment manual. Houston [1971]

 TJ778 .A512                              1965
    American Gas Association. Prime Mover and Large Tonnage Air
Conditioning
    Sales & Promotion Committee.
    Gas turbine manual. New York, Industrial Press [1965]

 TJ787 .L321                              1967
    Larew, Walter B., 1904-
    Carburetors & carburetion [by] Walter B. Larew.
    [1st ed.] Philadelphia, Chilton Book Co. [1967]

 TJ795.A1 D564 1990                       1980
    Stinson, Karl W.
    Diesel engineering handbook / Karl W. Stinson.
    Rev. 12th ed. Norwalk, Conn. : Business Journals, c1980.

 TJ795 .B627                              1966
    Black, Perry O.
    Audels diesel engine manual, by Perry O. Black.
    [3d ed.] Indianapolis, T. Audel [1966]

 TJ810 .B421                              1976
    Behrman, Daniel.
    Solar energy : the awakening science / Daniel Behrman ; photographs
by
    Madeleine de Sinety. 1st ed. Boston : Little, Brown, c1976.

 TJ810 .Z36                               1963
    Zarem, A. M.
    Introduction to the utilization of solar energy [by] Farrington
Daniels
    [and others] Edited by A. M. Zarem [and] Duane D. Erway.
    New York, McGraw-Hill [1963]

 TJ840 .F646                              1967
    Fluidics Symposium, Chicago, 1967.
    Advances in fluidics. Edited by Forbes T. Brown.
    New York, American Society of Mechanical Engineers, United
Engineering
    Center [1967]

 TJ840 .H995                              1979
    Hydraulic handbook; fundamental hydraulics and data useful in the
solution
    of pump application problems. / Colt Industries.
    11th ed. Kansas City, Kan. : Fairbanks Morse Pump Division, c1979.

 TJ840 .S949                              1966
    Stewart, Harry L.
    ABC's of fluid power [by] Harry L. Stewart and John M. Storer.
    [1st ed.] Indianapolis, H. W. Sams [1966]

 TJ843 .P239F                             1980
    Parker-Hannifin Corporation. Power and Controls Group. Training
    Department. Industrial pneumatic technology / Parker Fluidpower.
    Cleveland, OH : Parker-Hannifin Corporation, c1980.

TJ900 .P983 1986                         1986
    Pump handbook / edited by Igor J. Karassik ... [et al.]
    2nd ed. New York : McGraw-Hill, c1986.

 TJ900 .P983 1986                         1986
    Pump handbook / edited by Igor J. Karassik ... [et al.]
    2nd ed. New York : McGraw-Hill, c1986.

 TJ900 .S849                              1986
    Stewart, Harry L.
    Pumps / by Harry L. Stewart ; revised by Tom Philbin.
    2nd ed. / revised by Tom Philbin. New York : Macmillan, c1986.

 TJ919 .L431                              1965
    Lazarkiewicz, Szczepan.
    Impeller pumps, by Stephen Lazarkiewicz [and] Adam T. Troskola*nski.
    [1st ed., rev. and enl. from the 1st Polish ed. by the authors and
    translated by David K. Rutter] Oxford, New York, Pergamon Press
[1965]

 TJ919 .S827                              1965
    Stepanoff, Alexey Joakim.
    Pumps and blowers; selected advanced topics. Two-phase flow; flow
and
    pumping of solids in suspension and fluid mixtures. [By] A. J.
Stepanoff.
    New York, J. Wiley [1965]

 TJ930 .P664 1998                         1998
    Pipe line rules of thumb handbook : quick and accurate solutions to
your
    everyday pipe line problems / E.W. McAllister, editor.
    Pipeline rules of thumb handbook 4th ed. Houston, Tex. : Gulf Pub.
Co., c1998.

 TJ930 .S554 1991                         1991
    Sherwood, David R.
    The piping guide : for the design and drafting of industrial piping
    systems / David R. Sherwood, Dennis J. Whistance. 2nd ed.
    San Francisco, CA, USA : Syentek, c1991.

 TJ935 .S761 1990                         1990
    Spitzer, David W.
    Industrial flow measurement / David W. Spitzer.
    Research Triangle Park, N.C. : Instrument Society of America, c1990.

 TJ935 .W346                              1984
    Watters, Gary Z.
    Analysis and control of unsteady flow in pipelines / by Gary Z.
Watters.
    2nd ed. Boston : Butterworth, c1984.

 TJ940 .B276                              1963
    Barrington, Alfred E.
    High vacuum engineering. Under the editorship of Irving L. Kosow.
    Englewood Cliffs, N.J., Prentice-Hall [1963]

 TJ940 .B897                              1965
    Brunner, William F.
    Practical vacuum techniques [by] William F. Brunner, Jr., and Thomas
H.
    Batzer. New York, Reinhold Pub. Corp. [1965]

 TJ940 .H116 1990                         1990
    Hablanian, M. H.
    High-vacuum technology : a practical guide / Marsbed H. Hablanian.
    New York : M. Dekker, c1990.

 TJ940 .H882 1991                         1991
    Hucknall, D. J.
    Vacuum technology and applications / David J. Hucknall.
    Oxford ; Boston : Butterworth-Heinemann, 1991.

 TJ940 .L672                              1965
    Lewin, Gerhard S.
    Fundamentals of vacuum science and technology / [by] Gerhard Lewin.
    New York : McGraw-Hill, [1965]

 TJ940 .O36 1989                          1989
    O'Hanlon, John F., 1937-
    A user's guide to vacuum technology / John F. O'Hanlon.
    2nd ed. New York : Wiley, c1989.

 TJ940 .R845T 1982                        1982
    Roth, A. (Alexander)
    Vacuum technology / A. Roth.
    2nd, rev. ed. Amsterdam ; New York : North-Holland Pub. Co. ; New
York : Sole
    distributors for U.S.A. and Canada, Elsevier North-Holland, 1982.

 TJ960 .A358                              1959
    Alden, John Leslie, 1892-
    Design of industrial exhaust systems / by John L. Alden [and] John
M.
    Kane. 3d ed. New York : Industrial Press, [1959]

TJ960 .F199                              1961
    Fan engineering : an engineer's handbook on air, its movement and
    distribution in air conditioning, industrial ventilation, mechanical
    draft, conveying and other applications employing fans / edited by
Robert
    Jorgensen. 6th ed. Buffalo, N. Y. : Buffalo Forge Company 1961.

 TJ985 .C737 1989                         1989
    Compressed air and gas handbook / Compressed Air and Gas Institute ;
John
    P. Rollins, editor. 5th ed. Englewood Cliffs, N.J. : Prentice Hall,
c1989.

 TJ1025 .O97 1966                         1966
    Ower, Ernest, 1894-
    The measurement of air flow, by E. Ower and R. C. Pankhurst.
    [4th ed., completely rev.] Oxford, New York, Pergamon Press [1966]

 TJ1045 .G816                             1962
    Greenwood, Douglas C.
    Mechanical power transmission : component selection and application
/
    Douglas C. Greenwood. New York : McGraw-Hill, 1962.

 TJ1051 .P573 1994                        1994
    Phipps, Clarence A., 1922-
    Variable speed drive fundamentals / by Clarence A. Phipps.
    Lilburn, GA : Fairmont Press, c1994.

 TJ1051 .S761 1990                        1990
    Spitzer, David W.
    Variable speed drives : principles and applications for energy cost
    savings / David William Spitzer. 2nd ed., rev.
    Research Triangle Park, NC : Instrument Society of America, c1990.

 TJ1075 .B219 1996                        1996
    Bannister, Kenneth E., 1955-
    Lubrication for industry / Kenneth E. Bannister.
    1st ed. New York, N.Y. : Inudstrial Press, c1996.

 TJ1075 .C182                             1966
    Cameron, A. (Alastair), 1917-
    The principles of lubrication [by] A. Cameron.
    New York, Wiley [1966]

TJ1075 .M649 1993                        1993
    Miller, Robert W.
    Lubricants and their applications / Robert W. MIller.
    New York : McGraw-Hill, c1993.

 TJ1075 .R116 1995                        1995
    Rabinowicz, Ernest.
    Friction and wear of materials / Ernest Rabinowicz.
    2nd ed. New York : Wiley, c1995.

 TJ1160 .D754                             1953
    Doyle, Lawrence E.
    Metal machining. New York, Prentice-Hall, 1953.

 TJ1165 .A547 1983                        1983
    Anderson, John G., 1912-
    Technical shop mathematics / John G. Anderson.
    2nd ed. New York, N.Y. : Industrial Press, 1983.

 TJ1165 .M418                             1967
    Massing, O.
    Fundamentals of technical mathematics, [by] O. Massing [and] G. A.
    Sanders. Toronto, New York, McGraw-Hill Co. of Canada [1967]

 TJ1166 .D282                             1962
    Dean, Mills.
    Semiconductor and conventional strain gages. Editor: Mills Dean,
III. 
    Associate editor: Richard D. Douglas.
    New York, Academic Press, 1962.

 TJ1167 .K35 1977                         1977
    Kennedy, Clifford W., 1895-
    Inspection and gaging : a training manual and reference work ... /
    Clifford W. Kennedy, Donald E. Andrews.
    5th ed. New York : Industrial Press, c1977.

 TJ1177 .S128 1987                        1987
    Safeguarding concepts illustrated.
    5th ed. Chicago, Ill. : National Safety Council, 1987.

 TJ1180 .P771                             1968
    Pollack, Herman W.
    Manufacturing and machine tool operations [by] Herman W. Pollack.
    Englewood Cliffs, N.J., Prentice-Hall [1968]

 TJ1185 .M149                             1972
    Machinability Data Center.
    Machining data handbook.
    2d ed. Compiled by the technical staff of the Machinability Data
Center.
    Cincinnati, 1972.

 TJ1186 .M587 1989                        1989
    Metal cutting tool handbook.
    7th ed. New York, N.Y. : Published for the Metal Cutting Tool
Institute by
    Industrial Press, 1989.

 TJ1189 .C537 1969                        1969
    Childs, James J.
    Principles of numerical control [by] James J. Childs.
    2d ed. New York, Industrial Press [1969]

 TJ1195 .H236 1985                        1985
    Hand Tools Institute.
    Guide to hand tools : selection, safety tips, proper use and care /
Hand
    Tools Institute. New York : Hand Tools Institute, c1985.

 TJ1313 .F219 1982                        1982
    Farago, Francis T.
    Handbook of dimensional measurement / Francis T. Farago.
    2nd ed. New York, N.Y. : Industrial Press, c1982.

 TJ1320 .S785 1989                        1989
    Standard handbook of fastening and joining / Robert O. Parmley,
    editor-in-chief. 2nd ed. New York : McGraw-Hill, c1989.

 TJ1320 .S927 1995                        1995
    Structural integrity of fasteners / Pir M. Toor, editor.
    Philadelphia, Pa : ASTM, c1995.

 TJ1363 .D552                             1975
    Dickie, D. E.
    Crane handbook / compiled by D. E. Dickie.
    1st ed. Toronto : Construction Safety Association of Ontario, 1975.

 TJ1363 .K78                              1976
    Kogan, Josef.
    Crane design : theory and calculations of reliability / Josef Kogan
;
    foreword by J. F. Eden. New York : Wiley, c1976.

 TJ1363 .S529 1991                        1990
    Shapiro, Howard I., 1932-
    Cranes and derricks / Howard I. Shapiro, Jay P. Shapiro, Lawrence K.
    Shapiro. 2nd ed. New York : McGraw-Hill, c1991.

 TJ1363 .W363 1979                        1979
    Weaver, WM. M., (William M.)
    Overhead crane handbook : design data and engineering information
used in
    the manufacture and application of overhead and gantry cranes / by
WM. M.
    Weaver (Crane Application Engineer). Fourth Edition
    Harvey, Ill. : Whiting Corporation, c1979.

 TJ1363 .W363 1979                        1979
    Weaver, WM. M., (William M.)
    Overhead crane handbook : design data and engineering information
used in
    the manufacture and application of overhead and gantry cranes / by
WM. M.
    Weaver (Crane Application Engineer). Fourth Edition
    Harvey, Ill. : Whiting Corporation, c1979.

 TJ1367 .R569                             1975
    Construction Safety Association of Ontario.
    Rigging manual / compiled by D. E. Dickie.
    1st ed. Toronto : Construction Safety Association of Ontario, 1975.

 TJ1367 .R837                             1964
    Rossnagel, W. E.
    Handbook of rigging, for construction and industrial operations [by]
W. E.
    Rossnagel. 3d ed. New York, McGraw-Hill [1964]

 TJ1374 .A614                             1960
    Annett, Fred Ansley
    Elevators : Electric and electrohydraulic elevators, escalators,
moving
    sidewalks and ramps. / Fred Ansley Annett.  3rd Edition.
    New York : McGraw-Hill, 1960.

 TK9 .I59 1993                            1993
    Institute of Electrical and Electronics Engineers.
    The new IEEE standard dictionary of electrical and electronics terms
    [including abstracts of all current IEEE standards] / Christopher J.
    Booth, editor ; Gediminas P. Kurpis, chair. 5th ed.
    New York, N.Y. : Institute of Electrical and Electronics Engineers,
c1993.

 TK103.7 .D574 1986                       1986
    Digital communications / Thomas C. Bartee, editor-in-chief.
    1st ed. Indianapolis, IN : Howard W. Sams, 1986.

 TK145 .C284 1981 SOL. MAN.               1981
    Carlson, A. Bruce, 1937-
    Solutions manual for electrical engineering : concepts and
applications /
    A. Bruce Carlson, David G. Gisser. Reading, Mass. : Addison-Wesley,
c1981.

 TK145 .C284 1981                         1981
    Carlson, A. Bruce.
    Electrical engineering : concepts and applications / A. Bruce
Carlson,
    David G. Gisser, with contributions from Fred K. Manasse.
    Reading, Mass. : Addison-Wesley, 1981.

 TK145 .E38H 1993                         1993
    The electrical engineering handbook / editor-in-chief, Richard C.
Dorf.
    Boca Raton : CRC Press, c1993.

 TK145 .M434                              1964
    Matsch, Leander W
    Capacitors, magnetic circuits, and transformers [by] Leander W.
Matsch.
    Englewood Cliffs, N. J., Prentice-Hall [1964]

 TK145 .N383 1991                         1991
    Neff, Herbert P., 1930-
    Introductory electromagnetics / Herbert P. Neff, Jr. New York :
Wiley, c1991.

 TK145 .S622                              1955
    Siskind, Charles Seymour, 1897-
    Electricity: direct and alternating current 2d ed. New York,
McGraw-Hill, 1955.

 TK145 .S657                              1966
    Smith, Ralph Judson.
    Circuits, devices and systems : a first course in electrical
engineering /
    Ralph J. Smith. New York : Wiley, c1966.

 TK146 .A214                              1973
    Adams, James E.
    Electrical principles and practices [by] James E. Adams.
    2d ed. New York, McGraw-Hill [1973]

 TK146 .B792                              1977
    Boylestad, Robert L.
    Electricity, electronics, and electromagnetics : principles and
    applications / Robert Boylestad, Louis Nashelsky.
    Englewood Cliffs, N.J. : Prentice-Hall, c1977.

 TK146 .D269 V.1                          1956
    Dawes, Chester Laurens, 1886-
    Industrial electricity. 3d ed. New York, McGraw-Hill, 1956-60.

 TK146 .D269                              1956
    Dawes, Chester Laurens, 1886-
    Industrial electricity. 3d ed. New York, McGraw-Hill, 1956-60.

 TK146 .K97                               1969
    Kuzne*t*sov, Mikhail Ivanovich, engineer.
    Fundamentals of electrical engineering [by] M. Kuznetsov.
Translated from
    the Russian by Boris Kuznetsov. New York, Gordon and Breach [1969?]

 TK146 .L773 1984                         1983
    Lister, Eugene C.
    Electric circuits and machines / Eugene C. Lister.
    6th ed. New York : McGraw-Hill, [1983] c1984.

 TK151 .C941 1992                         1992
    Croft, Terrell, 1880-
    American electricians' handbook / Terrell Croft, former editor,
Wilford I.
    Summers, editor. 12th ed. New York : McGraw-Hill, c1992.

 TK151 .N427 1991                         1991
    Nelson, Kenneth A.
    Electrical engineering quick reference cards / Kenneth A. Nelson.
    Belmont, CA : Professional Publications, c1991.

 TK151 .S727 1990                         1990
    Electrical inspection and plan examination manual. / SBCCI.
    Birmingham, Ala. : Southern Building Code Congress International,
Inc.,
    1990.

TK151 .S785 1987                         1987
    Standard handbook for electrical engineers / Donald G. Fink, H.
Wayne
    Beaty, editors. 12th. ed. New York, McGraw-Hill, 1987.

 TK151 .S785 1993                         1993
    Standard handbook for electrical engineers / Donald G. Fink, editor,
H.
    Wayne Beaty, editor. 13th ed. New York : McGraw-Hill, 1993.

 TK152 .U55 1992                          1992
    Understanding regulations on-- OSHA electrical safety rules for
    construction sites : including the official regulations.
    Overland Park, KS : EC&M, Intertec Electrical Group, c1992.

 TK152 .U55S 1993                         1991
    Understanding regulations on-- OSHA electrical design safety
standards :
    including the official regulations.
    New York, N.Y. : EC&M, Intertec Electrical Group, c1991.

 TK152 .U55W 1991                         1991
    Understanding regulations on-- OSHA electrical work rules with
complete
    lockout/tagout procedures : including the official regulations.
    Overland Park, KS : EC&M, Intertec Electrical Group, c1991.

 TK153 .C773                              1960
    Cooke, Nelson Magor.
    Basic mathematics for electronics. 2d ed. New York, McGraw-Hill,
1960.

 TK153.G766 SUPP.                         1986
    ANSI-Y32.2-1975-SUPPLEMENT
    ANSI-Y32.2-1975
    IEEE-STD-315A-1986
    Supplement to graphic symbols for electrical and electronics
diagrams /
    sponsor, IEEE Standards Coordinating Committee 11, Graphic Symbols,
    Institute of Electrical and Electronics Engineers.
    New York : The Institute, c1986.

 TK153.G766 SUPP.                         1986
    ANSI-Y32.2-1975-SUPPLEMENT
    ANSI-Y32.2-1975
    IEEE-STD-315A-1986
    Supplement to graphic symbols for electrical and electronics
diagrams /
    sponsor, IEEE Standards Coordinating Committee 11, Graphic Symbols,
    Institute of Electrical and Electronics Engineers.
    New York : The Institute, c1986.

 TK153 .R915                              1968
    R*udenberg, Reinhold, 1883-1961.
    Electrical shock waves in power systems; traveling waves in lumped
and
    distributed circuit elements. [Translated by Hanns J. Wetzstein from
the
    4th enl. German ed.] Cambridge, Harvard University Press, 1968.

 TK153 .W583 1986                         1986
    White, Donald R. J.
    A handbook on shielding design methodology and procedures / by
Donald R.J.
    White. 1st ed. Gainesville, Va. : Interference Control Technologies,
c1986.

 TK168 .B474                              1967
    Benson, Frank Atkinson.
    Electric circuit problems, with solutions [by] F. A. Benson.
    London, Spon; 1967.

 TK168 .F832                              1964
    Franklin, Julius I.
    Electrical engineering / [by] Julius I. Franklin.
    New York : MacMillan, [1964]

 TK168 .J77 1980                          1980
    Jones, Lincoln D.
    Electrical engineering license review : review for the National
Electrical
    Engineering Exam / Lincoln D. Jones, James A. Lima.
    5th ed. San Jose, Calif. : Engineering Press, 1980

 TK169 .A546                              1969
    Anderson, Edwin P., 1895-
    Questions and answers for electricians examinations, by Edwin P.
Anderson.
    Rev. and updated by Roland E. Palmquist. [3d ed.] Indianapolis, T.
Audel [1969]

 TK169 .Y26R 1990 SAMPLE EXAM.            1990
    Yarbrough, Raymond B.
    Electrical engineering reference manual / Raymond B. Yarbrough.
    5th ed. Belmont, CA : Professional Publications, c1990.

 TK260.A4 N277 1990                       1990
    ANSI-C2
    IEEE-C2
    National electrical safety code / Secretariat, Institute of
Electrical and
    Electronics Engineers, Inc.
    1990 ed.
    New York, NY : IEEE, 1990.

 TK260 .N277H 1996 1996                   1996
    The National electrical code handbook : based on the 1996 edition of
the
    National electrical code / Mark W. Earley, editor-in-chief, Joseph
V.
    Sheehan, editor, John M. Caloggero, editor. 7th ed.
    Quincy, Mass. : National Fire Protection Association, c1996.

 TK260 .N277H 1999                        1999
    The National electrical code handbook : based on the 1999 edition of
the
    National electrical code / Mark W. Earley, editor-in-chief, Joseph
V.
    Sheehan, editor, John M. Caloggero, editor.
    8th ed. Quincy, Mass. : National Fire Protection Association, c1999.

 TK260 .N277H 2002                        2002
    The National electrical code handbook/ Mark W. Earley,
editor-in-chief;
    Joseph V. Sheehan, editor; John M. Caloggero, editor ; Timothy M.
    Croucher, editor. NEC 2002 national electrical code handbook
    NEC handbook 2002 9th ed.
    Quincy, MA: National Fire Protection Association, 2002.

 TK260 .U55 1990                          1990
    Understanding NE code rules on...motors & motor controls.
    New York : EC&M, Intertec Electrical Group, c1990.

 TK275 .B287                              1963
    Bartholomew, Davis, 1905-
    Electrical measurements and instrumentation.
    Boston, Allyn and Bacon, 1963.

 TK275 .E68                               1970
    Erickson, Willard L.
    Experimental backgrounds for electronic instrumentation, by Willard
L.
    Erickson and Chester V. Wells.
    1st ed., rev. Boulder, Colo., Laboratory Systems Research [1970]

 TK275 .I59B 1986                         1986
    IEEE recommended practice for protection and coordination of
industrial
    and commercial power systems / sponsor, Industrial and Commercial
Power
    Systems Committee of the IEEE Industry Applications Society;
approved
    September 19, 1985, IEEE Standards Board; approved February 28,
1986,
    American National Standards Insttute.
    New York : Institute of Electrical and Electronics Engineers, c1986.

TK275 .T473                              1979
    Thompson, Lawrence M.
    Basic electrical measurements and calibration / Lawrence M.
Thompson.
    Pittsburgh, Pa. : Instrument Society of America, 1979.

 TK275 .T559                              1967
    Tiedemann, Arthur Theodore, 1926-
    Elements of electrical measurements [by] Arthur T. Tiedemann.
    Boston : Allyn and Bacon, [1967]

 TK311 .M629                              1966
    Middleton, Robert Gordon, 1908-
    101 ways to use your VOM and VTVM, by Robert G. Middleton.
    [2d ed.] Indianapolis, Bobbs-Merrill [1966]

 TK399 .G886                              1967
    Handbook of telemetry and remote control / Elliot L. Gruenberg,
    editor-in-chief. New York : McGraw-Hill, c1967.

 TK401 .G475                              1982
    Gill, A. S.
    Electrical equipment, testing and maintenance / A.S. Gill.
    Reston, Va. : Reston Pub. Co., c1982.

 TK435 .M483 2005                         2004
    Electrical cost data, 2005 / RS Means ; senior editor, John H.
Chiang.
    RS Means electrical cost data
    28th annual ed. Kingston, Mass. : R.S. Means, Inc., c2004.

 TK435 .M483 2005                         2004
    Electrical cost data, 2005 / RS Means ; senior editor, John H.
Chiang.
    RS Means electrical cost data 28th annual ed.
    Kingston, Mass. : R.S. Means, Inc., c2004.

 TK435 .M483C 2004                        2003
    Means electrical change order cost data 2004. /
    16th annual edition. Kingston, MA : R.S. Means, c2003.

 TK260-.N277H-1993                        1992
    The National electrical code handbook : based on the 1993 edition of
the
    National Electrical Code / Mark W. Early, Richard H. Murray, and
John M.
    Caloggero, editors  6th ed.
    Quincy, Mass. : National Fire Protection Association, c1992.





Linda Holton-Hamilton
Kennedy Space Center Library
Library-A Acquisitions
Email: [log in to unmask]