The following list of  books is from the John F. Kennedy Space Center, NASA Library and is available to all North American Libraries.  The list expires September 10, 2008

POC:  [log in to unmask]

TJ211 .V989                              1982

    Vukobratovic, Miomir.

    Dynamics of manipulation robots : theory and application / M.

    Vukobratovic, V. Potkonjak. Berlin ; New York : Springer-Verlag, 1982.

 TJ211 .V990                              1982

    Vukobratovic, Miomir.

    Control of manipulation robots : theory and application / M. Vukobratovic,

    D. Stokic. Berlin ; New York : Springer-Verlag, 1982.

 TJ213 .H319                              1969

    Harrison, Howard L.

    Introduction to automatic controls [by] Howard L. Harrison [and] John G.

    Bollinger. 2d ed. Scranton, International Textbook Co. [1969]

 TJ216 .F831 1990                         1990

    Franklin, Gene F.

    Digital control of dynamic systems / Gene F. Franklin, J. David Powell,

    Michael L. Workman. 2nd ed. Reading, Mass. : Addison-Wesley Pub. Co., c1990.

 TJ216 .K96                               1963

    Kuo, Benjamin C., 1930-

    Analysis and synthesis of sampled-data control systems [by] Benjamin C.

    Kuo. Englewood Cliffs, N.J. Prentice-Hall [1963]

 TJ219 .S849                              1976

    Stewart, Harry L.

    Pneumatics and hydraulics : a revision of Fluid power, by Harry L. Stewart

    / by Harry L. Stewart. 3d ed. Indianapolis, IN : Howard W. Sams & Co., c1976.

 TJ223.M53 P222 1988                      1988

    Parallel processing in control : the transputer and other architectures /

    edited by P.J. Fleming.    London, U.K. : P. Peregrinus on behalf of the Institution

    of Electrical Engineers, c1988.

 TJ223.T4 R783                            1969

    Roots, William, K., 1924-

    Fundamentals of temperature control / William K. Roots.

    New York : Academic Press, 1969.

TJ223.V3 B347 1994                       1994

    Baumann, Hans D., 1930-

    Control valve primer : a user's guide / Hans D. Baumann.

    2nd ed. Research Triangle Park, N.C. : Instrument Society of America, 1994.

 TJ230 .C912 1976                         1976

    Creamer, Robert H.

    Machine design / Robert H. Creamer.

    2d ed. Reading, Mass. : Addison-Wesley Pub. Co., c1976.

 TJ233 .B652                              1963

    Blodgett, Omer W.

    Design of weldments. Cleveland, James F. Lincoln Arc Welding Foundation [1963]

 TJ255 .A427                              1941

    Allen, John Robins, 1869-1920.

    Heat engines; steam, gas, steam turbines and their auxiliaries, by John R.

    Allen...and Joseph A. Bursley. 5th edition.

    New York London, McGraw-Hill book company, inc., 1941.

 TJ260 .C738 1985                         1985

    Computational techniques in heat transfer. Volume 1 / edited by R.W. Lewis

    ... [et al.]. Swansea, U.K. : Pineridge Press, c1985.

 TJ260 .S324                              1959

    Schenck, Hilbert van Nydeck, 1926-

    Heat transfer engineering. Englewood Cliffs, N.J., Prentice-Hall, 1959.

 TJ262 .S255                              1983

    Sauer, Harry J., 1935-

    Heat pump systems / Harry J. Sauer, Jr., Ronald H. Howell.

    New York : Wiley, c1983.

 TJ264 .S587 1992                         1992

    Silverstein, Calvin C.

    Design and technology of heat pipes for cooling and heat exchange / Calvin

    C. Silverstein. Washington : Hemisphere Pub. Corp., c1992.

 TJ265 .B912                              1969

    Brzustowski, Thomas A.

    Introduction to the principles of engineering thermodynamics [by] Thomas

    A. Brzustowski. Reading, Mass., Addison-Wesley Pub. Co. [c1969]

 TJ265 .C899                              1968

    Crawford, Franzo H. (Franzo Hazlett), 1900-

    Thermodynamics for engineers [by] Franzo H. Crawford [and] William D. Van

    Vorst. New York, Harcourt, Brace & World [1968]

 TJ267 .I64 1995                          1995

    Bassaraba, Bruce M.

    IPT's rotating equipment training manual : machinery reliability &

    condition monitoring. / Bruce M. Bassaraba and James A. Archer.

    1st edition Edmonton, Alberta, CA IPT Publishing and Training Ltd., 1995.

 TJ288 .T173 1991                         1991

    Taplin, Harry, 1935-

    Boiler plant and distribution system optimization manual / by Harry

    Taplin. Lilburn, GA : Fairmont Press ; Englewood Cliffs, NJ : Distributed by

    Prentice-Hall, c1991.

 TJ415 .K54                               1967

    King, Reno C.

    Piping handbook [edited by] Reno C. King. 5th ed. New York, McGraw-Hill [1967]

 TJ563 .B954 1990                         1990

    Burger, Robert, 1921-

    Cooling tower technology : maintenance, upgrading and rebuilding / Robert

    Burger. 2nd ed.

    Lilburn, GA : Fairmont Press ; Englewood Cliffs, NJ : Distributed by

    Prentice-Hall, c1990.

 TJ563 .N277                              1971

    National Association of Corrosion Engineers.

    Cooling water treatment manual. Houston [1971]

 TJ778 .A512                              1965

    American Gas Association. Prime Mover and Large Tonnage Air Conditioning

    Sales & Promotion Committee.

    Gas turbine manual. New York, Industrial Press [1965]

 TJ787 .L321                              1967

    Larew, Walter B., 1904-

    Carburetors & carburetion [by] Walter B. Larew.

    [1st ed.] Philadelphia, Chilton Book Co. [1967]

 TJ795.A1 D564 1990                       1980

    Stinson, Karl W.

    Diesel engineering handbook / Karl W. Stinson.

    Rev. 12th ed. Norwalk, Conn. : Business Journals, c1980.

 TJ795 .B627                              1966

    Black, Perry O.

    Audels diesel engine manual, by Perry O. Black.

    [3d ed.] Indianapolis, T. Audel [1966]

 TJ810 .B421                              1976

    Behrman, Daniel.

    Solar energy : the awakening science / Daniel Behrman ; photographs by

    Madeleine de Sinety. 1st ed. Boston : Little, Brown, c1976.

 TJ810 .Z36                               1963

    Zarem, A. M.

    Introduction to the utilization of solar energy [by] Farrington Daniels

    [and others] Edited by A. M. Zarem [and] Duane D. Erway.

    New York, McGraw-Hill [1963]

 TJ840 .F646                              1967

    Fluidics Symposium, Chicago, 1967.

    Advances in fluidics. Edited by Forbes T. Brown.

    New York, American Society of Mechanical Engineers, United Engineering

    Center [1967]

 TJ840 .H995                              1979

    Hydraulic handbook; fundamental hydraulics and data useful in the solution

    of pump application problems. / Colt Industries.

    11th ed. Kansas City, Kan. : Fairbanks Morse Pump Division, c1979.

 TJ840 .S949                              1966

    Stewart, Harry L.

    ABC's of fluid power [by] Harry L. Stewart and John M. Storer.

    [1st ed.] Indianapolis, H. W. Sams [1966]

 TJ843 .P239F                             1980

    Parker-Hannifin Corporation. Power and Controls Group. Training

    Department. Industrial pneumatic technology / Parker Fluidpower.

    Cleveland, OH : Parker-Hannifin Corporation, c1980.

TJ900 .P983 1986                         1986

    Pump handbook / edited by Igor J. Karassik ... [et al.]

    2nd ed. New York : McGraw-Hill, c1986.

 TJ900 .P983 1986                         1986

    Pump handbook / edited by Igor J. Karassik ... [et al.]

    2nd ed. New York : McGraw-Hill, c1986.

 TJ900 .S849                              1986

    Stewart, Harry L.

    Pumps / by Harry L. Stewart ; revised by Tom Philbin.

    2nd ed. / revised by Tom Philbin. New York : Macmillan, c1986.

 TJ919 .L431                              1965

    Lazarkiewicz, Szczepan.

    Impeller pumps, by Stephen Lazarkiewicz [and] Adam T. Troskola*nski.

    [1st ed., rev. and enl. from the 1st Polish ed. by the authors and

    translated by David K. Rutter] Oxford, New York, Pergamon Press [1965]

 TJ919 .S827                              1965

    Stepanoff, Alexey Joakim.

    Pumps and blowers; selected advanced topics. Two-phase flow; flow and

    pumping of solids in suspension and fluid mixtures. [By] A. J. Stepanoff.

    New York, J. Wiley [1965]

 TJ930 .P664 1998                         1998

    Pipe line rules of thumb handbook : quick and accurate solutions to your

    everyday pipe line problems / E.W. McAllister, editor.

    Pipeline rules of thumb handbook 4th ed. Houston, Tex. : Gulf Pub. Co., c1998.

 TJ930 .S554 1991                         1991

    Sherwood, David R.

    The piping guide : for the design and drafting of industrial piping

    systems / David R. Sherwood, Dennis J. Whistance. 2nd ed.

    San Francisco, CA, USA : Syentek, c1991.

 TJ935 .S761 1990                         1990

    Spitzer, David W.

    Industrial flow measurement / David W. Spitzer.

    Research Triangle Park, N.C. : Instrument Society of America, c1990.

 TJ935 .W346                              1984

    Watters, Gary Z.

    Analysis and control of unsteady flow in pipelines / by Gary Z. Watters.

    2nd ed. Boston : Butterworth, c1984.

 TJ940 .B276                              1963

    Barrington, Alfred E.

    High vacuum engineering. Under the editorship of Irving L. Kosow.

    Englewood Cliffs, N.J., Prentice-Hall [1963]

 TJ940 .B897                              1965

    Brunner, William F.

    Practical vacuum techniques [by] William F. Brunner, Jr., and Thomas H.

    Batzer. New York, Reinhold Pub. Corp. [1965]

 TJ940 .H116 1990                         1990

    Hablanian, M. H.

    High-vacuum technology : a practical guide / Marsbed H. Hablanian.

    New York : M. Dekker, c1990.

 TJ940 .H882 1991                         1991

    Hucknall, D. J.

    Vacuum technology and applications / David J. Hucknall.

    Oxford ; Boston : Butterworth-Heinemann, 1991.

 TJ940 .L672                              1965

    Lewin, Gerhard S.

    Fundamentals of vacuum science and technology / [by] Gerhard Lewin.

    New York : McGraw-Hill, [1965]

 TJ940 .O36 1989                          1989

    O'Hanlon, John F., 1937-

    A user's guide to vacuum technology / John F. O'Hanlon.

    2nd ed. New York : Wiley, c1989.

 TJ940 .R845T 1982                        1982

    Roth, A. (Alexander)

    Vacuum technology / A. Roth.

    2nd, rev. ed. Amsterdam ; New York : North-Holland Pub. Co. ; New York : Sole

    distributors for U.S.A. and Canada, Elsevier North-Holland, 1982.

 TJ960 .A358                              1959

    Alden, John Leslie, 1892-

    Design of industrial exhaust systems / by John L. Alden [and] John M.

    Kane. 3d ed. New York : Industrial Press, [1959]

TJ960 .F199                              1961

    Fan engineering : an engineer's handbook on air, its movement and

    distribution in air conditioning, industrial ventilation, mechanical

    draft, conveying and other applications employing fans / edited by Robert

    Jorgensen. 6th ed. Buffalo, N. Y. : Buffalo Forge Company 1961.

 TJ985 .C737 1989                         1989

    Compressed air and gas handbook / Compressed Air and Gas Institute ; John

    P. Rollins, editor. 5th ed. Englewood Cliffs, N.J. : Prentice Hall, c1989.

 TJ1025 .O97 1966                         1966

    Ower, Ernest, 1894-

    The measurement of air flow, by E. Ower and R. C. Pankhurst.

    [4th ed., completely rev.] Oxford, New York, Pergamon Press [1966]

 TJ1045 .G816                             1962

    Greenwood, Douglas C.

    Mechanical power transmission : component selection and application /

    Douglas C. Greenwood. New York : McGraw-Hill, 1962.

 TJ1051 .P573 1994                        1994

    Phipps, Clarence A., 1922-

    Variable speed drive fundamentals / by Clarence A. Phipps.

    Lilburn, GA : Fairmont Press, c1994.

 TJ1051 .S761 1990                        1990

    Spitzer, David W.

    Variable speed drives : principles and applications for energy cost

    savings / David William Spitzer. 2nd ed., rev.

    Research Triangle Park, NC : Instrument Society of America, c1990.

 TJ1075 .B219 1996                        1996

    Bannister, Kenneth E., 1955-

    Lubrication for industry / Kenneth E. Bannister.

    1st ed. New York, N.Y. : Inudstrial Press, c1996.

 TJ1075 .C182                             1966

    Cameron, A. (Alastair), 1917-

    The principles of lubrication [by] A. Cameron.

    New York, Wiley [1966]

TJ1075 .M649 1993                        1993

    Miller, Robert W.

    Lubricants and their applications / Robert W. MIller.

    New York : McGraw-Hill, c1993.

 TJ1075 .R116 1995                        1995

    Rabinowicz, Ernest.

    Friction and wear of materials / Ernest Rabinowicz.

    2nd ed. New York : Wiley, c1995.

 TJ1160 .D754                             1953

    Doyle, Lawrence E.

    Metal machining. New York, Prentice-Hall, 1953.

 TJ1165 .A547 1983                        1983

    Anderson, John G., 1912-

    Technical shop mathematics / John G. Anderson.

    2nd ed. New York, N.Y. : Industrial Press, 1983.

 TJ1165 .M418                             1967

    Massing, O.

    Fundamentals of technical mathematics, [by] O. Massing [and] G. A.

    Sanders. Toronto, New York, McGraw-Hill Co. of Canada [1967]

 TJ1166 .D282                             1962

    Dean, Mills.

    Semiconductor and conventional strain gages. Editor: Mills Dean, III.

    Associate editor: Richard D. Douglas.

    New York, Academic Press, 1962.

 TJ1167 .K35 1977                         1977

    Kennedy, Clifford W., 1895-

    Inspection and gaging : a training manual and reference work ... /

    Clifford W. Kennedy, Donald E. Andrews.

    5th ed. New York : Industrial Press, c1977.

 TJ1177 .S128 1987                        1987

    Safeguarding concepts illustrated.

    5th ed. Chicago, Ill. : National Safety Council, 1987.

 TJ1180 .P771                             1968

    Pollack, Herman W.

    Manufacturing and machine tool operations [by] Herman W. Pollack.

    Englewood Cliffs, N.J., Prentice-Hall [1968]

 TJ1185 .M149                             1972

    Machinability Data Center.

    Machining data handbook.

    2d ed. Compiled by the technical staff of the Machinability Data Center.

    Cincinnati, 1972.

 TJ1186 .M587 1989                        1989

    Metal cutting tool handbook.

    7th ed. New York, N.Y. : Published for the Metal Cutting Tool Institute by

    Industrial Press, 1989.

 TJ1189 .C537 1969                        1969

    Childs, James J.

    Principles of numerical control [by] James J. Childs.

    2d ed. New York, Industrial Press [1969]

 TJ1195 .H236 1985                        1985

    Hand Tools Institute.

    Guide to hand tools : selection, safety tips, proper use and care / Hand

    Tools Institute. New York : Hand Tools Institute, c1985.

 TJ1313 .F219 1982                        1982

    Farago, Francis T.

    Handbook of dimensional measurement / Francis T. Farago.

    2nd ed. New York, N.Y. : Industrial Press, c1982.

 TJ1320 .S785 1989                        1989

    Standard handbook of fastening and joining / Robert O. Parmley,

    editor-in-chief. 2nd ed. New York : McGraw-Hill, c1989.

 TJ1320 .S927 1995                        1995

    Structural integrity of fasteners / Pir M. Toor, editor.

    Philadelphia, Pa : ASTM, c1995.

 TJ1363 .D552                             1975

    Dickie, D. E.

    Crane handbook / compiled by D. E. Dickie.

    1st ed. Toronto : Construction Safety Association of Ontario, 1975.

 TJ1363 .K78                              1976

    Kogan, Josef.

    Crane design : theory and calculations of reliability / Josef Kogan ;

    foreword by J. F. Eden. New York : Wiley, c1976.

 TJ1363 .S529 1991                        1990

    Shapiro, Howard I., 1932-

    Cranes and derricks / Howard I. Shapiro, Jay P. Shapiro, Lawrence K.

    Shapiro. 2nd ed. New York : McGraw-Hill, c1991.

 TJ1363 .W363 1979                        1979

    Weaver, WM. M., (William M.)

    Overhead crane handbook : design data and engineering information used in

    the manufacture and application of overhead and gantry cranes / by WM. M.

    Weaver (Crane Application Engineer). Fourth Edition

    Harvey, Ill. : Whiting Corporation, c1979.

 TJ1363 .W363 1979                        1979

    Weaver, WM. M., (William M.)

    Overhead crane handbook : design data and engineering information used in

    the manufacture and application of overhead and gantry cranes / by WM. M.

    Weaver (Crane Application Engineer). Fourth Edition

    Harvey, Ill. : Whiting Corporation, c1979.

 TJ1367 .R569                             1975

    Construction Safety Association of Ontario.

    Rigging manual / compiled by D. E. Dickie.

    1st ed. Toronto : Construction Safety Association of Ontario, 1975.

 TJ1367 .R837                             1964

    Rossnagel, W. E.

    Handbook of rigging, for construction and industrial operations [by] W. E.

    Rossnagel. 3d ed. New York, McGraw-Hill [1964]

 TJ1374 .A614                             1960

    Annett, Fred Ansley

    Elevators : Electric and electrohydraulic elevators, escalators, moving

    sidewalks and ramps. / Fred Ansley Annett.  3rd Edition.

    New York : McGraw-Hill, 1960.

 TK9 .I59 1993                            1993

    Institute of Electrical and Electronics Engineers.

    The new IEEE standard dictionary of electrical and electronics terms

    [including abstracts of all current IEEE standards] / Christopher J.

    Booth, editor ; Gediminas P. Kurpis, chair. 5th ed.

    New York, N.Y. : Institute of Electrical and Electronics Engineers, c1993.

 TK103.7 .D574 1986                       1986

    Digital communications / Thomas C. Bartee, editor-in-chief.

    1st ed. Indianapolis, IN : Howard W. Sams, 1986.

 TK145 .C284 1981 SOL. MAN.               1981

    Carlson, A. Bruce, 1937-

    Solutions manual for electrical engineering : concepts and applications /

    A. Bruce Carlson, David G. Gisser. Reading, Mass. : Addison-Wesley, c1981.

 TK145 .C284 1981                         1981

    Carlson, A. Bruce.

    Electrical engineering : concepts and applications / A. Bruce Carlson,

    David G. Gisser, with contributions from Fred K. Manasse.

    Reading, Mass. : Addison-Wesley, 1981.

 TK145 .E38H 1993                         1993

    The electrical engineering handbook / editor-in-chief, Richard C. Dorf.

    Boca Raton : CRC Press, c1993.

 TK145 .M434                              1964

    Matsch, Leander W

    Capacitors, magnetic circuits, and transformers [by] Leander W. Matsch.

    Englewood Cliffs, N. J., Prentice-Hall [1964]

 TK145 .N383 1991                         1991

    Neff, Herbert P., 1930-

    Introductory electromagnetics / Herbert P. Neff, Jr. New York : Wiley, c1991.

 TK145 .S622                              1955

    Siskind, Charles Seymour, 1897-

    Electricity: direct and alternating current 2d ed. New York, McGraw-Hill, 1955.

 TK145 .S657                              1966

    Smith, Ralph Judson.

    Circuits, devices and systems : a first course in electrical engineering /

    Ralph J. Smith. New York : Wiley, c1966.

 TK146 .A214                              1973

    Adams, James E.

    Electrical principles and practices [by] James E. Adams.

    2d ed. New York, McGraw-Hill [1973]

 TK146 .B792                              1977

    Boylestad, Robert L.

    Electricity, electronics, and electromagnetics : principles and

    applications / Robert Boylestad, Louis Nashelsky.

    Englewood Cliffs, N.J. : Prentice-Hall, c1977.

 TK146 .D269 V.1                          1956

    Dawes, Chester Laurens, 1886-

    Industrial electricity. 3d ed. New York, McGraw-Hill, 1956-60.

 TK146 .D269                              1956

    Dawes, Chester Laurens, 1886-

    Industrial electricity. 3d ed. New York, McGraw-Hill, 1956-60.

 TK146 .K97                               1969

    Kuzne*t*sov, Mikhail Ivanovich, engineer.

    Fundamentals of electrical engineering [by] M. Kuznetsov.  Translated from

    the Russian by Boris Kuznetsov. New York, Gordon and Breach [1969?]

 TK146 .L773 1984                         1983

    Lister, Eugene C.

    Electric circuits and machines / Eugene C. Lister.

    6th ed. New York : McGraw-Hill, [1983] c1984.

 TK151 .C941 1992                         1992

    Croft, Terrell, 1880-

    American electricians' handbook / Terrell Croft, former editor, Wilford I.

    Summers, editor. 12th ed. New York : McGraw-Hill, c1992.

 TK151 .N427 1991                         1991

    Nelson, Kenneth A.

    Electrical engineering quick reference cards / Kenneth A. Nelson.

    Belmont, CA : Professional Publications, c1991.

 TK151 .S727 1990                         1990

    Electrical inspection and plan examination manual. / SBCCI.

    Birmingham, Ala. : Southern Building Code Congress International, Inc.,

    1990.

TK151 .S785 1987                         1987

    Standard handbook for electrical engineers / Donald G. Fink, H. Wayne

    Beaty, editors. 12th. ed. New York, McGraw-Hill, 1987.

 TK151 .S785 1993                         1993

    Standard handbook for electrical engineers / Donald G. Fink, editor, H.

    Wayne Beaty, editor. 13th ed. New York : McGraw-Hill, 1993.

 TK152 .U55 1992                          1992

    Understanding regulations on-- OSHA electrical safety rules for

    construction sites : including the official regulations.

    Overland Park, KS : EC&M, Intertec Electrical Group, c1992.

 TK152 .U55S 1993                         1991

    Understanding regulations on-- OSHA electrical design safety standards :

    including the official regulations.

    New York, N.Y. : EC&M, Intertec Electrical Group, c1991.

 TK152 .U55W 1991                         1991

    Understanding regulations on-- OSHA electrical work rules with complete

    lockout/tagout procedures : including the official regulations.

    Overland Park, KS : EC&M, Intertec Electrical Group, c1991.

 TK153 .C773                              1960

    Cooke, Nelson Magor.

    Basic mathematics for electronics. 2d ed. New York, McGraw-Hill, 1960.

 TK153.G766 SUPP.                         1986

    ANSI-Y32.2-1975-SUPPLEMENT

    ANSI-Y32.2-1975

    IEEE-STD-315A-1986

    Supplement to graphic symbols for electrical and electronics diagrams /

    sponsor, IEEE Standards Coordinating Committee 11, Graphic Symbols,

    Institute of Electrical and Electronics Engineers.

    New York : The Institute, c1986.

 TK153.G766 SUPP.                         1986

    ANSI-Y32.2-1975-SUPPLEMENT

    ANSI-Y32.2-1975

    IEEE-STD-315A-1986

    Supplement to graphic symbols for electrical and electronics diagrams /

    sponsor, IEEE Standards Coordinating Committee 11, Graphic Symbols,

    Institute of Electrical and Electronics Engineers.

    New York : The Institute, c1986.

 TK153 .R915                              1968

    R*udenberg, Reinhold, 1883-1961.

    Electrical shock waves in power systems; traveling waves in lumped and

    distributed circuit elements. [Translated by Hanns J. Wetzstein from the

    4th enl. German ed.] Cambridge, Harvard University Press, 1968.

 TK153 .W583 1986                         1986

    White, Donald R. J.

    A handbook on shielding design methodology and procedures / by Donald R.J.

    White. 1st ed. Gainesville, Va. : Interference Control Technologies, c1986.

 TK168 .B474                              1967

    Benson, Frank Atkinson.

    Electric circuit problems, with solutions [by] F. A. Benson.

    London, Spon; 1967.

 TK168 .F832                              1964

    Franklin, Julius I.

    Electrical engineering / [by] Julius I. Franklin.

    New York : MacMillan, [1964]

 TK168 .J77 1980                          1980

    Jones, Lincoln D.

    Electrical engineering license review : review for the National Electrical

    Engineering Exam / Lincoln D. Jones, James A. Lima.

    5th ed. San Jose, Calif. : Engineering Press, 1980

 TK169 .A546                              1969

    Anderson, Edwin P., 1895-

    Questions and answers for electricians examinations, by Edwin P. Anderson.

    Rev. and updated by Roland E. Palmquist. [3d ed.] Indianapolis, T. Audel [1969]

 TK169 .Y26R 1990 SAMPLE EXAM.            1990

    Yarbrough, Raymond B.

    Electrical engineering reference manual / Raymond B. Yarbrough.

    5th ed. Belmont, CA : Professional Publications, c1990.

 TK260.A4 N277 1990                       1990

    ANSI-C2

    IEEE-C2

    National electrical safety code / Secretariat, Institute of Electrical and

    Electronics Engineers, Inc.

    1990 ed.

    New York, NY : IEEE, 1990.

 TK260 .N277H 1996 1996                   1996

    The National electrical code handbook : based on the 1996 edition of the

    National electrical code / Mark W. Earley, editor-in-chief, Joseph V.

    Sheehan, editor, John M. Caloggero, editor. 7th ed.

    Quincy, Mass. : National Fire Protection Association, c1996.

 TK260 .N277H 1999                        1999

    The National electrical code handbook : based on the 1999 edition of the

    National electrical code / Mark W. Earley, editor-in-chief, Joseph V.

    Sheehan, editor, John M. Caloggero, editor.

    8th ed. Quincy, Mass. : National Fire Protection Association, c1999.

 TK260 .N277H 2002                        2002

    The National electrical code handbook/ Mark W. Earley, editor-in-chief;

    Joseph V. Sheehan, editor; John M. Caloggero, editor ; Timothy M.

    Croucher, editor. NEC 2002 national electrical code handbook

    NEC handbook 2002 9th ed.

    Quincy, MA: National Fire Protection Association, 2002.

 TK260 .U55 1990                          1990

    Understanding NE code rules on...motors & motor controls.

    New York : EC&M, Intertec Electrical Group, c1990.

 TK275 .B287                              1963

    Bartholomew, Davis, 1905-

    Electrical measurements and instrumentation.

    Boston, Allyn and Bacon, 1963.

 TK275 .E68                               1970

    Erickson, Willard L.

    Experimental backgrounds for electronic instrumentation, by Willard L.

    Erickson and Chester V. Wells.

    1st ed., rev. Boulder, Colo., Laboratory Systems Research [1970]

 TK275 .I59B 1986                         1986

    IEEE recommended practice for protection and coordination of industrial

    and commercial power systems / sponsor, Industrial and Commercial Power

    Systems Committee of the IEEE Industry Applications Society; approved

    September 19, 1985, IEEE Standards Board; approved February 28, 1986,

    American National Standards Insttute.

    New York : Institute of Electrical and Electronics Engineers, c1986.

TK275 .T473                              1979

    Thompson, Lawrence M.

    Basic electrical measurements and calibration / Lawrence M. Thompson.

    Pittsburgh, Pa. : Instrument Society of America, 1979.

 TK275 .T559                              1967

    Tiedemann, Arthur Theodore, 1926-

    Elements of electrical measurements [by] Arthur T. Tiedemann.

    Boston : Allyn and Bacon, [1967]

 TK311 .M629                              1966

    Middleton, Robert Gordon, 1908-

    101 ways to use your VOM and VTVM, by Robert G. Middleton.

    [2d ed.] Indianapolis, Bobbs-Merrill [1966]

 TK399 .G886                              1967

    Handbook of telemetry and remote control / Elliot L. Gruenberg,

    editor-in-chief. New York : McGraw-Hill, c1967.

 TK401 .G475                              1982

    Gill, A. S.

    Electrical equipment, testing and maintenance / A.S. Gill.

    Reston, Va. : Reston Pub. Co., c1982.

 TK435 .M483 2005                         2004

    Electrical cost data, 2005 / RS Means ; senior editor, John H. Chiang.

    RS Means electrical cost data

    28th annual ed. Kingston, Mass. : R.S. Means, Inc., c2004.

 TK435 .M483 2005                         2004

    Electrical cost data, 2005 / RS Means ; senior editor, John H. Chiang.

    RS Means electrical cost data 28th annual ed.

    Kingston, Mass. : R.S. Means, Inc., c2004.

 TK435 .M483C 2004                        2003

    Means electrical change order cost data 2004. /

    16th annual edition. Kingston, MA : R.S. Means, c2003.

 TK260-.N277H-1993                        1992

    The National electrical code handbook : based on the 1993 edition of the

    National Electrical Code / Mark W. Early, Richard H. Murray, and John M.

    Caloggero, editors  6th ed.

    Quincy, Mass. : National Fire Protection Association, c1992.

Linda Holton-Hamilton

Kennedy Space Center Library

Library-A Acquisitions

Email: [log in to unmask]