Print

Print


It took me awhile to understand what everyone was talking about but now 
I do. Here is the solution I have for the problem of coating adhering to 
the leader tape. What I do is take some splicing tape (the German stuff 
is great for this) and place it on the coating. It is slightly thinner 
than 1/4" so be very precise. What I do is place it on an edit block and 
then apply the slicing tape. I then lift the splicing tape and now  I 
have the coating on the splicing tape. From that point you just play it 
and that is that . As for ampex 456 the earliest tapes that I ran across 
were mid 80's and all of the tapes I have encountered had SSS.
Shai
P.S.
Richard great summery, you're top ace.  I can't find that chemical you 
wrote down as lubricant (the stuff GE is pushing) Can you write it again?
Shai

Paul Turney, Sirensound Digital UK wrote:
>  Alex,
>
>
> I think the only way to remedy this is to carefully go through the reel and edit off the leader. 
>
> I take it you can play the programme. 
>
>
>
>
>
>
> Paul Turney
> CONFIDENTIALITY NOTICE: This email message (including any attachments)
> is for the sole use of the intended recipient and may contain
> confidential and privileged information
>
> Sirensound Digital UK
> Somerford House
> 22 Somerford Road
> Cirencester
>  ++44 (0) 1285 642289 
> Sirensound Digital UK
>
> -----Original Message-----
> From: Alex Tomlin [mailto:[log in to unmask]]
> Sent: Thursday, December 17, 2009 10:08 PM
> To: [log in to unmask]
> Subject: Re: [ARSCLIST] Tape Shed-Sticking & stripping
>
> Hi all, We also have a few Ampex 406 1/4" 10.5" stereo tapes professionally recorded and stored in London around 77-80 that are suffering binder adhesion to leader tape. I'd be interested in hearing comments and suggestions as to handling this problem. Obviously the tapes require baking yet the main problem is the oxide sticking to the leader tape edited in between tracks. There are a few types of leader tape and have found that coloured and printed leader tape is the most problematic. We have very gently hand wound tapes whilst dousing the problem areas with isopropyl prior to any baking, but the oxide still sticks to the leader. We have also tried baking as well as dehydrating to no benefit. Does anyone have experience of this problem with Ampex 406? Will soaking in silica gel in the fridge be of benefit? So far there hasn't been any splicing-tape adhesive bleed which is another problem we're having with EMI Tape. Over the weekend I will attempt to post a link to photos of the tapes for everyone. Many thanks, alex. Alex Tomlin Senior Engineer Direct Line: 020 7400 8569 Mobile: 07788 438 291 Audio Transfers . Inflight Productions . 15 Stukeley Street . London . WC2B 5LT * Audio Transfers is a division of the Inflight Group of Companies and specialise in Digitisation, Format / File Conversions, Archiving, Compiling / Pre-Mastering and Audio Library Administration for the Music Industry * -----Original Message-----From: Association for Recorded Sound Discussion List [mailto:[log in to unmask]] On Behalf Of Richard L. HessSent: 15 December 2009 20:17To: [log in to unmask]: Re: [ARSCLIST] Tape Shed-Sticking & stripping Hi, Martin, This is very problematic, and I do NOT think baking is a good idea. There is a CHANCE that month-long cold soak in a desiccated atmosphere (silica gel inside double freezer (or foil) Zip-Loc bags in the fridge (not freezer)). It has worked for some 3M 176 that showed this symptom. It has also not worked for other tapes. Jim Wheeler gave me this technique. I don't know his source. I haven't used it much. The other thing to try is VERY slow unwinding - 1.88 in/s or slower. Sometimes that alone helps. The tape in the photo was baked based on a consensus of the people at the seminar (including the tape owner) because we didn't have time for cold soak and we wanted to see what would work (or not). Since that article, I have had good results with 3M201 which had the same problem and the 1.88 in/s wind-through solved it. Good luck! Cheers, Richard At 12:34 PM 2009-12-15, Martin Fisher wrote:>Got a polyester/plastic non-backcoated reel in which the binder is >stripping off onto the adjacent wind. AKA "binder adhesion to back >of next layer" on Richard Hess' site.> >http://richardhess.com/notes/2006/05/26/binder-adhesion-to-back-of-next-layer/> >Might baking be a solution for this?> >Martin Richard L. Hess email: [log in to unmask], Ontario, Canada (905) 713 6733 1-877-TAPE-FIXDetailed contact information: http://www.richardhess.com/tape/contact.htmQuality tape transfers -- even from hard-to-play tapes. -----------------------------Registered Office: 15 Stukeley Street, London WC2B 5LT, England.Registered in England number 1421223This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the email by you is prohibited. Please note that the information provided in this e-mail is in any case not legally binding; all committing statements require legally binding signatures.http://www.inflightproductions.com
>
>