JOHN F. KENNEDY SPACE CENTER LIBRARY
DISCARD LIST  D2010-07
 
[log in to unmask]before February 10, 2010
 
 
TK260 .N277H 2005                        2005
    The National electrical code handbook. / Mark W. Earley, editor-in-chief;
    Joseph V. Sheehan, editor; John M. Caloggero, editor ; Timothy M.
    Croucher, editor.  NEC 2005 national electrical code handbook
    NEC handbook 2005 10th ed.
 
TS156 .C849 1993                         1993
    Cottman, Ronald J., 1928-
    A guidebook to ISO 9000 and ANSI/ASQC Q90 / Ronald J. Cottman.
 
TS156 .C849 1993                         1993
    Cottman, Ronald J., 1928-
    A guidebook to ISO 9000 and ANSI/ASQC Q90 / Ronald J. Cottman.
 
TS156 .C952 1992                         1992
    Crouch, J. Michael.
    An ounce of application is worth a ton of abstraction : a practical guide
    to implementing total quality management / J. Michael Crouch.
 
TS156 .C967                              1987
    Cullen, Joe.
    Implementing total quality / Joe Cullen and Jack Hollingum.
 
TS156 .H987 1994                         1994
    Huyink, David Stevenson.
    ISO 9000 : motivating the people, mastering the process, achieving
    registration / David Stevenson Huyink, Craig Westover.
 
TS156 .H987 1994                         1994
    Huyink, David Stevenson.
    ISO 9000 : motivating the people, mastering the process, achieving
    registration / David Stevenson Huyink, Craig Westover.
 
TS156 .I61 1991                          1991
    ISO 9000
    International Organization for Standardization.
    ISO 9000 : International standards for quality management. /
 
TS156 .I85Q 1992                         1992
    Bureau of Business Practice
    ISO 9000 : handbook of quality standards and compliance.
    Quality Resources, c1992
 
TS156 .I85Q 1992                         1992
    Bureau of Business Practice
    ISO 9000 : handbook of quality standards and compliance.
    Quality Resources, c1992
 
TS156 .I85T 1995                         1995
    ISO 9000 Primer. / by Frank Bensley and Bill Wortman.
    Third Edition, Version 3.0
 
TS156 .I85T 1995                         1995
    ISO 9000 Primer. / by Frank Bensley and Bill Wortman.
    Third Edition, Version 3.0
TS156 .K16 1993                          1993
    Kanji, Gopal K.
    Total quality management process : a systematic approach / Gopal K. Kanji,
    Mike Asher.
 
TS156 .L239I 1993                        1993
    Lamprecht, James L., 1947-
    Implementing the ISO 9000 series / James L. Lamprecht.
 
TS156 .L239I 1993                        1993
    Lamprecht, James L., 1947-
    Implementing the ISO 9000 series / James L. Lamprecht.
 
TS156 .L812 1990                         1990
    Lochner, Robert H.
    Designing for quality : an introduction to the best of Taguchi and western
    methods of statistical experimental design / Robert H. Lochner, Joseph E.
    Matar.
 
TS156 .M163 1993                         1993
    MacLean, Gary E., 1949-
    Documenting quality for ISO 9000 and other industry standards / Gary E.
    MacLean.
 
TS156 .M235 1990                         1990
    Making total quality happen / edited by Frank Caropreso ; conference
    program director, Lawrence Schein.
 
TS156 .M649 1991                         1991
    Miller, Lawrence M.
    Design for total quality : A workbook for socio-technical design / Written
    by Lawrence M. Miller with much help from the consultants & staff of the
    Miller Consulting Group.
 
TS156 .M693 1991                         1991
    Moen, Ronald D.
    Improving quality through planned experimentation / Ronald D. Moen, Thomas
    W. Nolan, Lloyd P. Provost.
 
TS156 .M787 1991                         1991
    Montgomery, Douglas C.
    Introduction to statistical quality control / Douglas C. Montgomery.
    2nd ed.
 
TS156 .O89 2000                          2000
    Ott, Ellis R. (Ellis Raymond), 1906-
    Process quality control: troubleshooting and interpretation of data /
    Ellis R. Ott, Edward G. Schilling, Dean V. Neubauer.
    3rd ed.
 
TS156 .P355 1993                         1993
    Peace, Glen Stuart.
    Taguchi methods : a hands-on approach / Glen Stuart Peace.
 
TS156 .P999 1989                         1989
    Pyzdek, Thomas.
    What every engineer should know about quality control / Thomas Pyzdek.
 
TS156 .Q1 1989                           1989
    Quality control, robust design, and the Taguchi method / edited by Khosrow
    Dehnad.
 
TS156.Q3 A615 1990                       1990
    Annual Conference on Federal Quality and Productivity Improvement. (3rd).
    May 30-June 1, 1990.
    Roadmap to the 90's: Achieving excellence in public service : Proceedings.
    / Sponsored by the Office of Management and Budget and the President's
    Council on Management Improvement.
 
TS156.Q3 D911A                           1965
    Duncan, Acheson Johnston, 1904-
    Quality control and industrial statistics, by Acheson J. Duncan.
    3d ed.
 
TS156.Q3 F297 1991                       1991
    Feigenbaum, A. V. (Armand Vallin)
    Total quality control / A.V. Feigenbaum. 3rd ed., rev.
 
TS156.Q3 F297 1991                       1991
    Feigenbaum, A. V. (Armand Vallin)
    Total quality control / A.V. Feigenbaum. 3rd ed., rev.
 
TS156.Q3 H249                            1963
    Hansen, Bertrand L., 1922-
    Quality control : theory and applications / Bertrand L. Hansen.
 
TS156 .S559 1988                         1988
    Shores, A. Richard, 1942-
    Survival of the fittest : total quality control and management evolution /
    A. Richard Shores.
 
TS156 .S849 1994 GUIDE                   1994
    Stewart, James R.
    The 90-day ISO manual / James R. Stewart, Peter Mauch, Frank Straka.
 
TS156 .S849 1994 MANUAL                  1994
    Stewart, James R.
    The 90-day ISO manual / James R. Stewart, Peter Mauch, Frank Straka.
 
TS156 .S911 1988                         1988
    Stratton, A. Donald.
    An approach to quality improvement that works : with an emphasis on the
    white-collar area / by A. Donald Stratton.
 
TS156 .S911 1988                         1988
    Stratton, A. Donald.
    An approach to quality improvement that works : with an emphasis on the
    white-collar area / by A. Donald Stratton.
 
TS156 .T128 1988                         1988
    Taguchi methods and QFD : hows and whys for management : a special
    collection of papers and essays on today's quality issues and new quality
    technologies / Nancy E. Ryan, editor.
 
TS156 .T128Q 1986                        1986
    Taguchi, Gen*ichi, 1924-
    Introduction to quality engineering : designing quality into products and
    processes / Genichi Taguchi ; [translated into English by the Asian
    Productivity Organization].
 
TS156.2 .G853 1996                       1996
    Griffith, Gary.
    The quality technician's handbook / Gary K. Griffith. 3rd ed.
 
TS156.6 .B136 1995                       1995
    Badiru, Adedeji Bodinde, 1952-
    Industry's guide to ISO 9000 / Adedeji Bodunde Badiru.
 
TS156.6 .C949Q                           1984
    Crosby, Philip B.
    Quality without tears : the art of hassle-free management / Philip B.
    Crosby.
 
TS156.6 .C949                            1979
    Crosby, Philip B.
    Quality is free : the art of making quality certain / Philip B. Crosby.
 
TS156.6 .C949                            1979
    Crosby, Philip B.
    Quality is free : the art of making quality certain / Philip B. Crosby.
 
TS156.6 .G666 1993                       1993
    National Performance Review (U.S.).
    From red tape to results : creating a government that works better & costs
    less : report of the National Performance Review / Vice President Al Gore.
 
TS156.6 .G666 1993                       1993
    National Performance Review (U.S.).
    From red tape to results : creating a government that works better & costs
    less : report of the National Performance Review / Vice President Al Gore.
 
TS156.6 .G666N 1993                      1993
    From red tape to results : creating a government that works better & costs
    less : National Aeronautics and Space Administration : Accompanying Report
    of the National Performance Review. /
 
TS156.6 .I85 1997                        1996
    The ISO 9000 handbook / edited by Robert W. Peach. 3rd ed.
 
TS156.6 .K16 1994                        1994
    Kanholm, Jack.
    ISO 9000 quality system : department by department implementation for the
    certification audit / Jack Kanholm, edited by Dee Metler. 2nd ed.
 
TS156.6 .K81 1998                        1998
    Kolka, James W.
    ISO 9000 : a legal perspective / by James W. Kolka. 1st ed.
 
TS156.6 .L232 1991                       1991
    Lamkin, Jean G.
    The federal manager's guide to TQM / Jean G. Lamkin.
 
TS156.6 .L239P 1992                      1992
    Lamprecht, James L., 1947-
    ISO 9000 : preparing for registration / James L. Lamprecht.
 
TS156.6 .S774                            1980
    Squires, Frank H.
    Successful quality management / by Frank H. Squires ; compiled and edited
    by Robert T. Linke.
 
TS156.6 .S955 2000                       2000
    Summers, Donna C. S.
    Quality / Donna C.S. Summers. 2nd ed.
 
TS156.8 .B322 1988                       1988
    Patton, Joseph D.
    Maintainability and maintenance management / Joseph D. Patton, Jr.
    2nd ed., rev. and enl.
 
TS156.8 .G488 1989                       1989
    Gilmore, Walter E.
    The user-computer interface in process control : a human factors
    engineering handbook / Walter E. Gilmore, David I. Gertman, Harold S.
    Blackman.
 
TS156.8 .P322                            1980
    Patton, Joseph D.
    Maintainability and maintenance management / Joseph D. Patton, Jr.
 
TS157.5 .I61 1994                        1994
    Intelligent scheduling / contributors, M. Aarup ... [et al.] ; editors,
    Monte Zweben, Mark S. Fox.
 
TS158 .B977 1991                         1991
    Busch, Dennis H.
    The new critical path method : CPM : the state-of-the-art in project
    modeling and time reserve management / Dennis H. Busch.
 
TS160 .S551 1992                         1992
    Sherbrooke, Craig C.
    Optimal inventory modeling of systems : multi-echelon techniques / Craig
    C. Sherbrooke.
 
TS165 .P235 1999                         1999
    Park, Richard J.
    Value engineering : a plan for invention / Richard J. Park.
 
TS170 .H784 2001                         2001
    Hooks, Ivy F.
    Customer-centered products : creating successful products through smart
    requirements management / Ivy F. Hooks & Kristin A. Farry.
 
TS170 .R367 1997                         1997
    Reinertsen, Donald G., 1950-
    Managing the design factory : a product developer's toolkit / Donald G.
    Reinertsen.
 
TS173 .A528                              1971
    Amstadter, Bertram L.
    Reliability mathematics: fundamentals, practices, procedures / [by]
    Bertram L. Amstadter.
 
TS173 .F161 2000                         2000
    ASM International Conference on Failure Prevention (1st 2000 May 23-25 :
    Cleveland, Oh.)
    Failure prevention through education : getting to the   root cause :
    proceedings of the first ASM International    Conference on Failure
    Prevention, organized by the ASM Failure Analysis Committee, 23-25 May
    2000, Cleveland, Ohio / ed. by James Scutti.
    iTitle at head of each paper: Proceedings of failure prevention through
    education : getting to the root cause,  23-25 May 2000, Cleveland, Ohio.
    Proceedings of the first ASM International Conference on Failure
    Prevention
 
TS173 .M165 1998                         1998
    McLinn, James A.
    Mechanical design reliability primer : simplified approaches and
    techniques / by James A. McLinn in cooperation with the Reliability
    Division of ASQ. 1st ed.
 
TS173 .R382 1992                         1992
    Reliability and Maintainability Symposium (1992 : Las Vegas, Nev.)
    Annual Reliability and Maintainability Symposium : 1992 proceedings : Las
    Vegas, Nevada, USA, 1992 January 21-23.
 
TS173 .R382 1993                         1993
    Reliability Analysis Center (U.S.)
    Reliability sourcebook : "How and where to get R&M data and information" :
    1993 / prepared by Reliability Analysis Center.
 
TS173 .S644 1976                         1976
    Smith, Charles O., 1920-
    Introduction to reliability in design / Charles O. Smith.
 
TS175 .H224M 1993                        1993
    Hammer, Willie.
    Product safety management and engineering / Willie Hammer. 2nd ed.
 
TS177 .M483 2006                         2005
    Means facilities construction cost data, 2006. /
    20th annual ed.
 
TS183 .H236D 1994                        1994
    Handbook of design, manufacturing, and automation / edited by Richard C.
    Dorf and Andrew Kusiak.
 
TS191.8 .R666                            1986
    Robot grippers / edited by D.T. Pham and W.B. Heginbotham.
 
TS191.8 .S675                            1985
    Snyder, Wesley E.
    Industrial robots : computer interfacing and control / Wesley E. Snyder.
 
TS191.8 .W926 1986                       1986
    Working safely with industrial robots / Peter M. Strubhar, editor.
    1st ed.
    Dearborn, Michigan : Robotics International of SME, Publications
 
TS192 .C188 1995                         1995
    Campbell, John Dixon.
    Uptime : strategies for excellence in maintenance management / John Dixon
    Campbell.
 
TS192 .J37                               1973
    Jardine, Andrew Kennedy Skilling.
    Maintenance, replacement and reliability [by] A. K. S. Jardine.
 
TS192 .M226M 1987                        1987
    Maintenance management / edited by Edward Hartmann.
    [Norcross, Ga.] : Industrial Engineering and Management Press, Institute
    of Industrial Engineers, 1987.
 
TS192 .M226                              1977
    Maintenance engineering handbook.
    3rd ed. Lindley R. Higgins, editor-in-chief, L. C. Morrow, editor.
 
TS192 .M687 1990                         1990
    Mobley, R. Keith, 1943-
    An introduction to predictive maintenance / R. Keith Mobley.
 
TS192 .M924 1997                         1997
    Moubray, John.
    Reliability-centered maintenance / John Moubray. 2nd ed.
 
TS192 .N163 1988                         1988
    Nakajima, Seiichi, 1928-
    Introduction to TPM : total productive maintenance / Seiichi Nakajima ;
    preface by Norman Bodek.
 
TS205 .B43 1969                          1968
    Begeman, Myron L. (Myron Louis), 1893-
    Manufacturing processes [by] Myron L. Begeman [and] B. H. Amstead.
    6th ed.
 
TS213 .D361                              1970
    DeLollis, Nicholas J.
    Adhesives for metals: theory and technology [by] Nicholas J. DeLollis.
 
TS227 .M659                              1968
    Milner, D. R.
    Introduction to welding and brazing, by D. R. Milner and R. L. Apps.
    [1st ed.]
 
TS227.2 .A512 1989                       1989
    American Welding Society.
    Filler metal comparison charts / compiled by AWS Technical Department.
 
TS230 .F622                              1963
    Flinn, Richard Aloysius, 1916-
    Fundamentals of metal casting.
 
TS239 .F536                              1968
    Syndicat g*en*eral des fondeurs de France. Commission nationale de la
    formation professionnelle.
    The technology of gravity die casting. Edited by T. P. Fisher. Translated
    from the French by B. Harocopos.
 
TS250 .B927                              1969
    Budzik, Richard S.
    Precision sheet metal: shop practice [by] Richard S. Budzik. [1st ed.]
 
TS250 .M612                              1961
    Meyer, Leo A.
    Sheet metal layout / Leo A. Meyer.
 
TS555 .W496                              1964
    Wernick, S. (Simon)
    The surface treatment and finishing of aluminium and its alloys, by S.
    Wernick and R. Pinner. 3d ed.
 
TS610 .H929 1993                         1993
    Humpston, Giles.
    Principles of soldering and brazing / Giles Humpston, David M. Jacobson.
 
TS654 .P485 1997                         1997
    Peterson, David S., 1966-
    Practical guide to industrial metal cleaning / by David S. Peterson.
 
TS655 .M588                              1965
    Ingham, Herbert S., 1910-
    Metco flame spray handbook (formerly Metallizing handbook), by H. S.
    Ingham and A. P. Shepard.
 
TS670 .B857 684387                       1965
    Brimi, Marjorie A.
    Electrofinishing [by] Marjorie A. Brimi [and] James R. Luck.
 
TS670 .F768                              1963
    Foulke, Donald Gardner, 1912-
    Electroplaters' process control handbook, edited by D. Gardner Foulke and
    Francis E. Crane, Jr.
 
TS690 .A512                              1959
    American Society for Testing Materials. Committee B-8 on Electrodeposited
    Metallic Coatings.c
    Symposium on electroless nickel plating; catalytic deposition of
    nickel-phosphorus alloys by chemical reduction in aqueous solution.
    Sponsored by Section C on Electroless Nickel, of Subcommittee I on
    Specifications, Papers, and Definitions.
 
TS693 .B838 V.2                          1963
    Brenner, Abner, 1908-
    Electrodeposition of alloys: principles and practice.
 
TS695 .B534                              1968
    Berry, Robert W.
    Thin film technology, by Robert W. Berry, Peter M. Hall [and] Murry T.
    Harris.
 
TS695 .P882V                             1955
    Battelle Memorial Institute
    Vapor-plating: the formation of coatings by vapor-deposition techniques,
    by C. F. Powell, I. E. Campbell, and B. W. Gonser [of] Battelle Memorial
    Institute.
 
TS698 .S769                              1965
    Spring, S. (Samuel), 1916-
    Preparation of metals for painting.
 
TS1171 .U84 1981                         1981
    The Use and processing of renewable resources : chemical engineering
    challenge of the future / Andrew J. Chase, editor.
 
TS1871 .I61 1988                         1989
    International Seminar on Elastomers (1988 : University of Akron)
    International Seminar on Elastomers : papers presented at the
    International Seminar on Elastomers, held at the Gardner Center of the
    University of Akron, 26-28 October 1988 / editors, James L. White,
    Kenkichi Murakami.
 
TS1871 .I61 1990                         1992
    International Seminar on Elastomers (1990 : Kurume Research Center
    Building)
    International Seminar on Elastomers : papers presented at the
    International Seminar on Elastomers, held at the Kureme Research Center
    Building, Kureme, Japan, 7-9 October 1990 / editors, James L. White,
    Kenkichi Murakami.
 
TS1871 .I61 1992                         1994
    Arab International Conference on Materials Science (3rd : 1992 :
    Alexandria, Egypt)
    Degradation and stabilization of materials / papers presented at the Third
    Arab International Conference on Materials Science, Alexandria, Egypt,
    26-30, September 1992 ; editor, Sherif H. Kandil.
    Applied polymer symposium  Applied polymer symposia
 
TS1871 .I61 1993                         1994
    International Seminar on Elastomers (5th : 1993 : University of Akron)
    International Seminar on Elastomers : papers presented at the
    International Seminar on Elastomers, held at the University of Akron, July
    14-16, 1993 / editors, James L. White, Takashi Inoue.
 
TS1890 .V228 1978                        1978
    Vanderbilt rubber handbook. / Edited by Robert O. Babbit.
    12th edition.
 
TT211 .C188                              1977
    Campbell, Hallock Cowles.
    Certification manual for welding inspectors / Hallock C. Campbell.
 
TT267 .D532                              1968
    Dezettel, Louis M.
    ABC's of electrical soldering, by Louis M. Dezettel. [1st ed.]
 
TT267 .M278 1979                         1979
    Manko, Howard H.
    Solders and soldering : materials, design, production, and analysis for
    reliable bonding / Howard H. Manko. 2d ed.
 
TT267 .S399 1995                         1995
    Schwartz, M. M. (Mel M)
    Brazing : for the engineering technologist / M. Schwartz.
 
TT273 .K86T 1981                         1981
    Kosloff, Albert.
    Screen printing techniques / Albert Kosloff. 3rd ed.
 
TX361.A8 N976 1989                       1989
    Nutrition in exercise and sport / editors, James F. Hickson, Jr. and Ira
    Wolinsky.
 
TX361.A8 P485 1988                       1988
    Peterson, Marilyn Shope, 1935-
    Eat to compete : a guide to sports nutrition / by Marilyn S. Peterson and
    Keith Peterson.
    Chicago : Year Book Medical Publishers, c1988.
 
TX537 .A244                              1948
    Advances in food research.
 
TX541 .F686 V.1                          1984
    Food analysis : principles and techniques / edited by Dieter W.
    Gruenwedel, John R. Whitaker.
 
TX541 .F686 V.2                          1984
    Food analysis : principles and techniques / edited by Dieter W.
    Gruenwedel, John R. Whitaker.
 
U264 .O41                                1983
    O'Keefe, Bernard J.
    Nuclear hostages / Bernard J. O'Keefe.
 
UA770 .S729 1983                         1983
    Soviet military power. Second Edition.
 
UB247 .S446 1989                         1989
    Security awareness in the 1980s : feature articles from the Security
    awareness bulletin, 1981 to 1989 / produced by the Security Awareness
    Divison, Educational Programs Department, Department of Defense Security
    Institute.
 
UB357 .F293 2007                         2007
    Federal benefits for veterans and dependents. / Department of Veterans
    Affairs.  2007 edition.
 
UC263 .H816 1993                         1993
    Horowitz, Barry M.
    Strategic buying for the future : opportunities for innovation in
    government electronics system acquisition / Barry M. Horowitz.
 
UG478 .S898 1999                         1999
    MR-1016-AF
    Strategic appraisal : the changing role of information in warfare / edited
    by Zalmay M. Khalilzad, John P. White ; foreword by Andrew W. Marshall.
    Changing role of information in warfare
 
UG485 .H515                              1957
    Henney, Keith, 1896-
    Electronic components handbook. Editors: Keith Henney and Craig Walsh.
 
UG485 .I61 1986                          1976
    The International countermeasures handbook.
 
UG635.R9 J28                             1974
    James, Peter N., 1940-
    Soviet conquest from space [by] Peter N. James.
 
 
UG643 .G671                              1988
    Gorn, Michael H.
    Harnessing the genie : science and technology forecasting for the Air
    Force, 1944-1986 / Michael H. Gorn.
 
UG1530 .I61 1984                         1984
    International security dimensions of space / edited by Uri Raanan, Robert
    L. Pfaltzgraff, Jr. (International Security Studies Program, the Fletcher
    School of Law and Diplomacy, Tufts University)
 
V993 .K95                                1967
    Kuenne, Robert E.
    The Polaris missile strike; a general economic systems analysis, by Robert
    E. Kuenne.
 
VK571.5 .M345                            1961
    Markey, Winston R.
    The mechanics of inertial position and heading indication [by] W.R. Markey
    and J. Hovorka.
 
VK571.5 .P685                            1962
    Pitman, George R.
    Inertial guidance. The authors: J. Stanley Ausman [and others].
 
Z52.5 .M52 L584 1997                     1997
    Leonhard, Woody.
    Word 97 annoyances / Woody Leonhard, Lee Hudspeth, and T.J. Lee.
    1st ed.
 
Z52.5 .M523 B735 1997                    1997
    Borland, Russell, 1946-
    Running Microsoft Word 97 / Russell Borland.
    Running Microsoft Word Ninety-seven Select ed.
 
 
 
 
 
Linda Holton-Hamilton
Library Technician
Interlibrary Loan, SSMT, & Acquisitions Department
Kennedy Space Center Library
M/C Library-A
Email: [log in to unmask]