 |
 |
Did i miss somehing ??
There is no way you can transfer a flat file playing it through an RIAA preamp. It will contain low freq boost hi freq cut.
My Op-amp Lab pre-amps are actually flat 20 hz to 20k hz.
My Stanton is loaded with 47K and 240 uuf at the pre amp input.
dnelson
--- On Tue, 3/9/10, Corey Bailey <[log in to unmask]> wrote:
> My plan is to transfer through an RIAA preamp, flat using
> outboard analog EQ
> and
> flat using post EQ via software then comparing the files.