Print

Print


Also, about the destructive part, this was a 24 hour recording captured
digitally offline and split into 6x4 hour recordings, the original is
preserved as captured, the preservation master has been converted, in ths
case, to 48khz/16bit, therefore exceeding the 2GB theshold, thus the split
at an apropriate pause.
Marie

On Fri, Nov 26, 2010 at 9:00 PM, Marie O'Connell <[log in to unmask]> wrote:

> Our version of Quadriga does not accept files over 2GB.  We only have
> certain parts of Quadriga, the batch processor and Audio File Inspector,
> that is why we use Wavelab as our editor and then process to the digital
> archive through quadriga.
>
> The process that a staff member used was not the way we do things, and as a
> new staff member, for some ridiculous reason she had never been shown the
> auto-split capability in wavelab by her predecessor.  She has now had
> training as to how to follow protocol.
>
> Cheers
> Marie
>
>
> On Fri, Nov 26, 2010 at 8:41 PM, Corey Bailey <[log in to unmask]> wrote:
>
>> Hi Marie,
>>
>> Your original post raised a couple of questions:
>>
>> 1) Won't Quadriga work in real time? I'm pretty certain that a colleague
>> of mine uses Quadriga to scan files as they are being digitized. In
>> real-time mode the file size doesn't matter (I think).
>>
>> 2) It sounds like you are doing destructive editing.  Why?
>>
>> THX
>>
>> Corey
>> Corey Bailey Audio Engineering
>>
>>
>> At 12:54 PM 11/25/2010, you wrote:
>>
>>> Sorry that my email was as 'clear as mud'!  I have now resolved the
>>> problem
>>> and everything is back to normal.
>>>
>>> Cheers
>>> Marie
>>>
>>> On Thu, Nov 25, 2010 at 9:21 PM, Marie O'Connell <[log in to unmask]>
>>> wrote:
>>>
>>> > We use Wavelab as our digital editor and Quadriga as our Audio file
>>> > Inspector.  When we have files greater than 2GB they are simply not
>>> accepted
>>> > in Quadriga, I am not concerned with this presently.  The method we use
>>> is
>>> > to split these files in Wavelab and give them persistent identifier
>>> codes to
>>> > represent this.
>>> >
>>> > One new staff member, our Accessions person unfortunately was not shown
>>> the
>>> > correct procedure to split files using Wavelab.  It seems to me that
>>> she has
>>> > cut the file which is stereo and then pasted it into a mono New wavelab
>>> file
>>> > and the saved it that way.
>>> >
>>> > These files are born digital and downloaded from NZ radio stations.
>>>  Now
>>> > that we no longer have the original second part of the original stereo
>>> > download, what is the suggestion as to fix up the second part, of the
>>> split
>>> > (which is now mono) to fix this problem, considering the original part
>>> had
>>> > now been "saved as" in a new format?
>>> >
>>> > Marie
>>> >
>>>
>>
>