Print

Print


Can you post a picture of the Dubbings jig?
Shai

On 31/03/2011 00:21, Tom Fine wrote:
> Hey, I have one of those Irish strobes, too. Forgot to mention that. 
> It doesn't work very well. The Dubbings disc is much better and 
> precision-feeling. I don't think any of these things are 
> instrumentation-precise but they are precise enough to get you in the 
> ballpark with real-world audio tape recordings.
>
> -- Tom Fine
>
> ----- Original Message ----- From: "Michael Biel" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, March 30, 2011 6:09 PM
> Subject: Re: [ARSCLIST] Shrunk strobe?
>
>
>> On 3/30/2011 5:41 PM, Roderic G Stephens wrote:
>>> I know that Tom Fine mentioned that he had an old strobe for 
>>> checking tape speed.  Does anyone know of any that are available?
>>
>> In the 50s OrrRadio made an Irish strobe disc on a handle which you 
>> could lightly press onto the outside wrap of the tape on the reel as 
>> it moved.  Worked fairly well if you didn't press hard enough to slow 
>> things down.  Robbins (I think) made a strobe tape but it was bumpy 
>> as it ran thru the machine.
>>>   I think I remember Ampex decks in Hollywood that had a small 
>>> circular strobe that fit on the top of the capstan, but they were of 
>>> bigger diameter than my Teac 2340R.
>>
>> That would make a very small strobe even on the larger capstans of 
>> the 30 IPS versions of the 200 and 300!   What I remember is a strobe 
>> that Land/Pultec had for the flywheel stabilizers of the 350.  We had 
>> them on some of the machines at a studio I worked for in the 60s, but 
>> they were useless because some of the stabilizers were so used that a 
>> groove had been worn into the shaft by the tape.  (These machines 
>> were used for editing with much shuttling.)
>>
>> Mike Biel  [log in to unmask]
>>
>