Thank you.

I'll consider that method.

What about WD40?  
I've heard some good reports on that - that it won't hurt vinyl, but help to loosen junk from the surface.
Can anyone speak on WD40 from experience?

Ben Roth

-----Original Message-----
From: Association for Recorded Sound Discussion List [mailto:[log in to unmask]] On Behalf Of Andrew Hamilton
Sent: Tuesday, December 13, 2011 12:56 PM
To: [log in to unmask]
Subject: Re: [ARSCLIST] Getting glue off vinyl

If it's truly vinyl, you might try applying an even coating of LockTite Wood Glue to the entire vinyl surface (not the label or spindle hole) and then
let it dry overnight.   Carefully peeling this off the next day, as a
complete, if floppy, negative of the record, will lift all debris from the grooves - and, hopefully, the glue residue you have, now.  This wood glue will not adhere to pvc once it is dry.  Yes, I saw this technique on YouTube, but I have performed the trick, here, and it works better than a Monk at cleaning vinyl discs.  If anyone can gainsay this practice, I'm all ears.  


On 12/13/11 11:19 AM, "James Roth" <[log in to unmask]> wrote:

> Hello everyone,
> I have records that came from a university that used anti-theft strips 
> glued inside the jacket.
> Some of the glue from those strips oozed off the strip and went onto 
> the inside of the jacket and other places..
> Of course, if the record had a sleeve there was not a problem, but 
> many of them didn't.
> As a result, There's a very thin, but audible strip of glue on the vinyl.
> Does anyone know the best way to remove that glue?
> Regards,
> Ben Roth

Serif Sound ♬ CD Premastering
➣ Dingbat Lacquer Sound Disc