Print

Print


They were not the only ones. I had a project a couple of years ago where we sent in several Otari decks to be rebuilt/serviced and they also had to go back several times before they got it right.




Jim Lindner

Email: [log in to unmask]
    
  Media Matters LLC.
  450 West 31st Street 4th Floor
  New York, N.Y. 10001

eFax (646) 349-4475
Mobile: (917) 945-2662
     
www.media-matters.net
Media Matters LLC. is a technical consultancy specializing in archival audio and video material. We provide advice and analysis, to media archives that apply the beneficial advances in technology to collection management.





On Apr 5, 2012, at 2:37 PM, Scott D. Smith wrote:

> Some parts are still available from Tascam. Belts can usually be sourced from a couple of suppliers.
> 
> However, if the decks haven't been serviced in awhile, you should really send them to someone who has the proper alignment tools and knowledge to do the job right.
> 
> FWIT: I recall getting a few brand new decks from Tascam back in the day that were incorrectly aligned right out of the box. I think their QC towards the end was getting rather sloppy.
> 
> --Scott
> 
> Scott D. Smith
> Chicago Audio Works, Inc.
> 
> On 4/4/2012 7:10 PM, Tom Fine wrote:
>> I recommend Russ at NJ Factory Service:
>> http://www.njfactoryservice.com/
>> 
>> He has restored a Tascam 122 for me and also gave me a very reasonable deal on a Tascam CDR/cassette recorder that he had restored. Oh, also on a used Technics SL-1200 that has worked like a champ, sold to me for about half price after a short career as a demo unit (the only thing "wrong" with it was it needed a new dust cover and I opted for the heavy rubber mat). The Tascam 122 restoration job was exactly what you are seeking, new belts and pinchroller. It works very well, excellently.
>> 
>> -- Tom Fine
>> 
>> ----- Original Message ----- From: "Bruce Whisler" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Wednesday, April 04, 2012 4:05 PM
>> Subject: [ARSCLIST] Tascam 112B
>> 
>> 
>> I have four Tascam 112B cassette players and seem to be reaching the point that I cannot keep any of them working.  The culprit is transport problems with belts that are stretching and rubber tires that are deteriorating.  Does anyone know of a source for parts?
>> 
>> Thanks,
>> Bruce Whisler
>> Clemson University
>> 
>