Print

Print


 There are a bunch of places selling remainder or NOS Stanton cartr


 There are a bunch of places selling remainder or NOS Stanton cartridges.What model do you need?

How many also know Gibson owns Cerwin-Vega?

Roger




________________________________
 From: Kevin P. Mostyn <[log in to unmask]>
To: [log in to unmask] 
Sent: Friday, August 3, 2012 1:36 PM
Subject: [ARSCLIST] Styli
 
I recently tried to order some more custom styli from Expert Stylus for a
Stanton 500 but was informed that Stanton has essentially left the phono
cartridge business, at least for now and perhaps forever, due to their
purchase by Gibson Guitars. Expert suggested that I turn to Shure or
Ortofon. Ortofon is out of my price range, so I'm looking at Shure. I know
that some U.S. dealers still have Expert-Tipped Stanton styli available but
I would like to find a long term solution.

I see the following cartridges available:

M78S - specifically for 78, uses the N78S stylus; Note that the N78S stylus
has max tracking of 3 grams.

M44-7 - no listing for a 78 stylus. Max tracking is 3 grams.

M97-xE - not clear if it takes an N78S stylus; regular shank probably too
delicate for historical records.

M92E - does take the N78S stylus

SC35C - does take the N78S stylus, but the regular shank for this cartridge
will track up to 5 grams! Its replacement stylus is cheaper than the N78S
stylus.

The list of available cartridges is at:
http://www.shure.com/americas/products/phono/index.htm

The list of available styli is at:
http://www.shure.com/americas/products/accessories/phono-accessories/index.h
tm

In a 2006 post, Dave Lennick recommended the SC35C with its quondam 78
stylus, but said stylus is no longer available. However, the stock SS35C
shank may be the same one used for the SS78E. Dave has also said that he
(really really) hates the N78S stylus. It may be that the SC35C shank will
fit into any of the cartridges that accept an N78S.

Since I'm having custom tips affixed, it really doesn't matter if a factory
78 tip is unavailable. I just need a high quality cartridge with an
appropriate strong shank that will survive playing historical records and
can be retipped by Expert. It appears that the only appropriate shanks from
Shure are the ones in the SC35C, the N78S and the M44-7.

I will use these mainly for transcription discs. I have a few thousand
transcription discs, vinyl, lacquer, uncoated aluminum.

I would very much appreciate any advice that the group can provide.

--Kevin Mostyn