Print

Print


Hi Glenn,

Can you paste the whole command that you tried, as well as the full
response?

Best,
David.


On Tue, Jul 16, 2013 at 4:41 PM, Glenn Bunton <[log in to unmask]> wrote:

> Meant to send sooner.
>
> I feel like we are very close. We now have everything installed and the
> base chronam software is up and running which is great.
>
> Our next problem. We attempted to load a batch of the content we are
> interested in putting into the chronam system. We we tried the load command
> we received the following error message (primary error, not full):
> ERROR:chronam.core.batch_loader:unable to load batch: unknown url type:
> /opt/chronam/data/batch_scu_gamecock_ver01/data/batch_1.xml
>
> Any ideas or suggestions what the problem might be? We are looking closer
> but thought I'd put this up on the list just in case anyone's seen this
> before and has some suggestions.
>
> Thanks for everyone's assistance so far.
>
>
>   ------------------------------
>  *From:* "Summers, Ed" <[log in to unmask]>
> *To:* [log in to unmask]
> *Sent:* Monday, July 8, 2013 9:33 AM
> *Subject:* Re: Not quite
>
> Hi Glenn,
>
> I incorrectly pinned the version of html5lib in the requirements.txt. I
> just pushed an update to GitHub that fixes the problem, so if you `git
> pull` you should be able to do the pip install now. Sorry about that!
>
> I will look into why the installation/configuration of Solr fails, if you
> think it's a problem with the installation instructions.
>
> //Ed
>
>
> From: Data, API, website, and code of the Chronicling America website
> [mailto:[log in to unmask]] On Behalf Of Glenn Bunton
> Sent: Wednesday, July 03, 2013 5:32 PM
> To: [log in to unmask]
> Subject: Re: Not quite
>
> Solved the jetty/solr issue with the installation config files so that's
> good. Outstanding problem is still now the command
>
> pip install -r requirements.pip
>
> that fails with the error information already provided.
>
> So close!!!
>
> ________________________________________
> From: "Summers, Ed" <[log in to unmask]>
> To: [log in to unmask]
> Sent: Wednesday, June 26, 2013 8:12 AM
> Subject: Re: Not quite
>
> Hi Glenn,
>
> Chronam doesn't care if Solr is running in a Jetty or Tomcat service
> container. However it is important that Solr is configured to use the
> chronam schema, which is independent of the container. You can find the
> schema xml here:
>
>
> https://github.com/LibraryOfCongress/chronam/blob/master/conf/schema.xml
>
> Let us know how it goes.
>
> //Ed
>
> From: Glenn Bunton [mailto:[log in to unmask]]
> Sent: Tuesday, June 25, 2013 2:01 PM
> To: Summers, Ed; [log in to unmask]
> Subject: Re: Not quite
>
> Hi Ed,
>
> I haven't been able to figure out the relationship between the jetty and
> the solr yet.
>
> Just as I test I wanted to see if I could install solr straight, apart
> from the chronam installation. I'm working on that right now and will let
> you know how that turns out.
>
> Question - does chronam care if it's jetty or tomcat or would either work?
> I know it's configured for jetty but just wondered if there was anything
> jetty-specific that would not work with tomcat.
>
> Will be back in touch with more info soon.
>
> ________________________________________
> From: "Summers, Ed" <[log in to unmask]>
> To: 'Glenn Bunton' <[log in to unmask]>; "[log in to unmask]" <
> [log in to unmask]>
> Sent: Monday, June 24, 2013 12:02 PM
> Subject: RE: Not quite
>
> Hi Glenn,
>
> Did you ever get any insight into what the jetty url was for the solr
> servlet? If you are still drawing a blank I would be willing to log in to
> the machine in question and take a look if you think it could help.
>
> //Ed
>
> From: Data, API, website, and code of the Chronicling America website
> [mailto:[log in to unmask]] On Behalf Of Glenn Bunton
> Sent: Friday, June 14, 2013 1:36 PM
> To: [log in to unmask]
> Subject: Not quite
>
> Hi Ed,
>
> Thanks for the last suggestions. I did the git but I still get a 404 error
> when I do
>
> http://localhost:8080/solr
>
> Interesting comments about javac and what it's looking for. Would it make
> any difference if it's jdk/jre6 or jdk/jre7? I noticed both were on our
> server. We installed 6 with the installation instructions for chronam but
> it looks like the default is 7 for the basic installation. I took 7 off to
> see if that would make any difference but got the same error. The javac is
> in /usr/bin
>
> Will keep looking around. Thanks for the continuing help.
>
>