Print

Print


Yes. It's very wide wow. But the +/- buttons stopped working first.

David


-----Original Message-----
From: Association for Recorded Sound Discussion List
[mailto:[log in to unmask]] On Behalf Of Mickey Clark
Sent: Tuesday, October 08, 2013 3:05 PM
To: [log in to unmask]
Subject: Re: [ARSCLIST] technics sl-1015 repair

Does the speed go out of control? if so-there is an easy fix. There are
three solder points under the motor assembly - I re-soldered them and
corrected the problem-mickey Follow me on Twitter
https://twitter.com/MickeyRClark M.C.Productions Vintage Recordings
    710 Westminster Ave. West
             Penticton BC
                V2A 1K8
http://mcproductions.shawbiz.ca
----- Original Message -----
From: "Cary Ginell" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, October 08, 2013 1:50 PM
Subject: Re: [ARSCLIST] technics sl-1015 repair


> Is the SL the one with the longer tonearm, designed to play 16" discs? 
> If so, I'd say yes.
>
> Cary
>
>> On Oct 8, 2013, at 1:47 PM, "Jim Sam" <[log in to unmask]> wrote:
>>
>> Cary,
>>
>> Do you know if the SP-15 is designed the same way and/or uses the 
>> same chip?
>>
>> Thanks,
>> Jim
>>
>>
>>> On Tue, Oct 8, 2013 at 10:34 AM, Cary Ginell <[log in to unmask]>
>>> wrote:
>>>
>>> This caused the downfall of my SP-1015 as well and apparently is a 
>>> common problem with these machines. The chip that controls the speed 
>>> is not made anymore, so the only way you can get one is to 
>>> cannabilize one from another turntable.
>>>
>>> Cary Ginell
>>>
>>>
>>> On Oct 8, 2013, at 10:22 AM, David Seubert 
>>> <[log in to unmask]>
>>> wrote:
>>>
>>>> I have a Technics SL-1015 in need of repair. The +/- speed 
>>>> adjustment stopped working a few weeks ago and this week the speed 
>>>> has become unstable. Does anybody know who can repair this?
>>>>
>>>>
>>>>
>>>> I can ship it, but would prefer someplace in LA.
>>>>
>>>>
>>>>
>>>> David Seubert
>>>>
>>>> UCSB
>>>
>