BTW, I have two SP-10 Mk II A turntables with, last I checked, functioning power supplies. They're not in very good shape and lack utility for me since they didn't come with bases. But, suitable for rebuilds or parts. Don't think I should sell a PS separately, but maybe. Also 2 EPA-A250 tonearms - one pretty good, one rough but good arm tube. I'd be happy to detail their condition and discuss their sale. Just taking up space here. Also got a UREI 1122, if you're into vintage preamps. VGC -----Original Message----- From: Association for Recorded Sound Discussion List [mailto:[log in to unmask]] On Behalf Of Overkill Sent: Tuesday, January 26, 2016 9:07 PM To: [log in to unmask] Subject: Re: [ARSCLIST] Technics SP-10MkII repair The SP-10 series is a totally different animal then the SP-15 tables. Not much the same about them. I have not gotten into the 10's but the 15's I know well. And Yes We have designed a new chip for the dreaded MN6042 IC and we are just working out the details of it now. Hope to have it done very soon! Dave Meyers -----Original Message----- From: Association for Recorded Sound Discussion List [mailto:[log in to unmask]] On Behalf Of Mickey Clark Sent: Tuesday, January 26, 2016 7:56 PM To: [log in to unmask] Subject: Re: [ARSCLIST] Technics SP-10MkII repair 3 solder connections under motor - look for 3 bad solder joints-Mickey Follow me on Twitter https://twitter.com/MickeyRClark M.C.Productions Vintage Recordings 710 Westminster Ave. West Penticton BC V2A 1K8 1-250-462-7881 http://mcproductions.ca ----- Original Message ----- From: "David Glasser" <[log in to unmask]> To: <[log in to unmask]> Sent: Tuesday, January 26, 2016 2:58 PM Subject: Re: [ARSCLIST] Technics SP-10MkII repair > Thank you Dave, and everyone else for the suggestions. Problem: Power > supply voltages are all OK, voltages at the power supply header on the > turntable PCB are correct. Speed selection will not latch, platter > does't spin, strobe does not light. Speed selection LEDs glow dimly. > Maybe that info will ring a bell. > > best, > > David Glasser > Chief Engineer > Airshow > 3063 E Sterling Circle #3 > Boulder, CO 80301 > > 303-247-9035 > > [log in to unmask] > > > > On Jan 26, 2016, at 3:43 PM, Dave Cawley <[log in to unmask]> wrote: > >> From: Dave Cawley >> Timestep Dartmouth >> e-mail [log in to unmask] >> Web site www.78-rpm.com >> Tel: from USA : 011 44 1803 833366 >> Fax: from USA : 011 44 1803 839498 >> >> >> Exactly what is wrong with it ? >> >> Dave > --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus