Hi Nancy – you asked:
what is the difference that causes the strings “unrestricted” and “LB 2395 . . .” to be asserted as rdf:value, while “available” is asserted as an rdfs:label?
So as we’ve said, in this statement:
bf:shelfMarkLcc [rdf:value “LB2395.C65 1991” ] ;
The datatype defaults to string, because it is not qualified. But it’s not qualified only because there is no primitive datatype for shelfMarkLcc. If there were, we could say:
“LB2395.C65 1991”^^xyz:shelfMarkLcc
In other words shelfMarkLcc is the practical datatype if not the formal datatype. The class bf:ShelfMarkLcc, should be sufficient to convey this.
(There is a slight error in the example. There is no property bf:shelfMarkLCC, it’s just bf:shelfmark. And it should read
bf:shelfMark [
a bf:ShelfMarkLcc;
rdf:value “LB2395.C65 1991” ] )
We intend to improve the understandability of the BIBFRAME specs and supporting documentation, so, no need to apologize for asking questions; questions that illustrate a lack of clarity in the documentation only lead to improvement. And we intend to correct errors; it’s questions like these that lead to discovery of errors.
Ray
From: Bibliographic Framework Transition Initiative Forum [mailto:[log in to unmask]] On Behalf Of Fallgren, Nancy (NIH/NLM) [E]
Sent: Monday, June 20, 2016 6:01 PM
To: [log in to unmask]
Subject: Re: [BIBFRAME] FW: [BIBFRAME] rdf:value
Agreed that a string is a datatype and that it is the default when no specific datatype is declared; however, I don’t tend to think of a string as a structured value or at least as something that a machine would understand as a structured value (but it’s certainly possible that’s a misunderstanding on my part). For example, a machine looking at an ISBN as just some string would not understand that the numeric sequence actually has significance.
With apologies if I’m being obtuse and belaboring this, but “Use rdf:value and rdfs:label as appropriate” doesn’t help me understand how they are each applied. Perhaps the original question should be restated specific to the BF 2.0 Item example –
In the Item example below, what is the difference that causes the strings “unrestricted” and “LB 2395 . . .” to be asserted as rdf:value, while “available” is asserted as an rdfs:label? All three are human readable strings, one is an alphanumeric assembled from a standard with rules, the other two are common terminology (from a standard vocab somewhere that is not published as RDF?), none of them name a resource, all describe attributes of the resource (circulation status, accessibility, and shelf location) – what criteria determine whether they are rdf:value or rdfs:label? In BF 2.0, what constitutes appropriate application of rdf:value and rdfs:label to this data?
<http://bibframe.example.org/item/itemZ <http://bibframe.example.org/item/itemZ%20> >
a bf:Item ;
bf:heldBy [rdfs:label “Library of Congress” ] ;
bf:subLocation [rdfs:label “Prints and Photographs Division” ] ;
bf:physicalLocation [rdfs:label “Reference collection” ] ;
bf:itemOf http://bibframe.example.org/instance/instanceY ;
bf:shelfMarkLcc [rdf:value “LB2395.C65 1991” ] ;
bf:usageAndAccessPolicy [
a bf:AccessPolicy ;
rdf:value “unrestricted” ] ;
bf:status [rdfs:label “available” ] ;
bf:note [rdfs:label “Page 31 torn” ] .
Thanks,
Nancy
From: Denenberg, Ray [mailto:[log in to unmask]]
Sent: Monday, June 20, 2016 4:57 PM
To: [log in to unmask]<mailto:[log in to unmask]>
Subject: Re: [BIBFRAME] FW: [BIBFRAME] rdf:value
Hi Tom –
Yes, my wording regarding rdfs:literal was a bit lazy. Actually rdfs:literal is defined, it is a class, the class of all literal values and the value of rdf:value is a member of this class, meaning the range of rdf:value is rdfs:literal (although I can’t find anywhere in the specs that actually says this) so it is a class/range rather than datatype. It seemed easier to just say the rdf:value datatype is rdfs:literal. But you’re right, technically that’s incorrect.
On the conventions document questions.
Second point. What the second point tries to say is this. Nothing terribly profound, but say you want to express that an instance has carrier “audio disc”. Then any of the following three way is acceptable:
bf:carrier <http://id.loc.gov/vocabulary/carriers/sd> .
bf:carrier <http://id.loc.gov/vocabulary/carriers/sd> .
<http://id.loc.gov/vocabulary/carriers/sd>
a bf:Carrier ;
rdfs:label “audio disc” .
bf:carrier <http://id.loc.gov/vocabulary/carriers/sd> [
a bf:Carrier ;
rdfs:label “audio disc” ] .
URI vs. Blank Node. Again nothing profound. Just that specifying whether it is acceptable to create blank nodes vs. requiring that a URI must always instead be created is outside the scope of an ontology.
Inverse property . Yes, we meant inverse, not reciprocal. When would an inverse property be appropriate or inappropriate? I cannot really articulate a firm rule,. In some cases it’s clear: instance and instanceOf. In some cases less clear: subject. BIBFRAME has defined a number of inverse properties and will continue to do so when a clear need is indicated. BIBFRAME’s position though is to not simply declare an inverse for every property just in case it happens to be needed some day.
Datatype vs. Object Properties. There was much discussion of this, on this listserv (quite a while back) and there was a strong consensus that there be no property that could take a literal object in one statement and a resource in another. Thus every property should be declared be a datatype or object property and BIBFRAME has explicitly done so, via OWL.
Classes and types. Do we mean the same thing? Yes and no. This is a guideline used in the development of the ontology. Take identifier types, for example. In BF 1 The type of identifier was expressed via property (e.g. bf:isbn). In BF2 it is expressed via class (bf:Isbn). So in BF 2, yes, type is intended to mean class membership. (There are a few exceptions, a few type properties to be used when there is no known class and the type must be expressed as a string, for example note type).
Proliferation of properties. There were cases in BIBFRAME 1 of multiple properties that have been consolidated into a single property in BIBFRAME 2. For example there was classificationScheme and identiferType and these have been consolidated into the single property bf:source (a literal, used only when there is no known class) because it would only occur within a bf:Classification or bf:Identifier resource (respectively) so it would be known whether it is a classification or identifier source.
rdf:value vs. rdfs:resource. Which says “Use rdf:value and rdfs:label as appropriate when supplying the value of a resource” probably should be truncated to “Use rdf:value and rdfs:label as appropriate”. Either that or elaborate as discussed in this thread,
Thanks, hope that helps, and keep those questions coming!
Ray
From: Bibliographic Framework Transition Initiative Forum [mailto:[log in to unmask]] On Behalf Of Tom Johnson
Sent: Monday, June 20, 2016 3:44 PM
To: [log in to unmask]<mailto:[log in to unmask]>
Subject: Re: [BIBFRAME] FW: [BIBFRAME] rdf:value
Chiming in to agree with Ray that, in general, xsd:string is an appropriate datatype for an rdf:value. And that ISBNs, in particular, are not xsd:integers. Their value space is not aligned with that type (as defined at [0].
Note that all literals have datatypes (see [1]). As a minor correction to Ray's point, the default datatype for for concrete syntaxes supporting "simple literals" is xsd:String, rather than rdfs:literal (which is not defined).
I don't think it's correct that rdf:value is an alternative to a URI. Indeed, it may often be useful to assign URIs to resources with declared values (e.g. to enumerate values for later use). Apart from that, I agree with where the group has landed on the differences from label types: labels name resources, while values express, to some extent, /what the resource is/.
To bring us back to the original issue: I recently read the conventions document, and found that I couldn't understand many of the items there. Perhaps some examples and/or motivations should be given?
Specifically, I could use clarification on:
(2) What is meant by this? does it say more than simply "use RDF"? Is it advising that data publishers avoid blank nodes without labels?
(3) What is the issue of URI vs. blank node? What does it mean to have no position? The explanation of this item seems to misunderstand blank nodes.
(5) Does this mean to say "inverse property", rather than reciprocal? When might a such a property be appropriate or inappropriate?
I have smaller concerns about:
(1) Can a reason for this decision be given? Is the goal to leave the door open for OWL-DL?
(4) This one has a good explanation, but some loose use of language; (e.g. "Some advantages of representing type as class rather than property"). Additionally, is "type" intended to mean something more specific than class membership?
(7) Are there examples? I think I understand this to be avoiding properties like :isPartOfWork, :isPartOfInstance, etc..., but I'm mostly guessing.
(8) (As discussed in this thread).
- Tom
[0] https://www.w3.org/TR/xmlschema-2/#integer
[1] https://www.w3.org/TR/rdf11-concepts/#section-Graph-Literal
On Mon, Jun 20, 2016 at 11:45 AM, Denenberg, Ray <[log in to unmask]<mailto:[log in to unmask]>> wrote:
Values of rdf:value in BIBFRAME do have a datatype: rdfs:literal. That means that unless declared otherwise, it is a string by default. Whenever you want, you can refine a literal
e.g.
(1) rdf: value “10”
(2) rdf:value “10”^^xs:int
The first is a string; the second is an integer. But there is nowhere in BIBFRAME that you would refine a value of rdf:value.
Consider for example a bf:Identifier. BIBFRAME prescribes that you assert the value of the identifier by rdf:value:
bf:identifiedBy [ a bf:Isbn
rdf:value “9783110413014” ] .
“9783110413014” is a string. You could refine it and assert that it’s an integer:
rdf:value “9783110413014”^^xs:int
But you don’t want to do that because it isn’t an integer, it’s just a string. And wherever rdf:value is prescribed in BIBFRAME, it is just a string.
Someday you may be able to assert that it has datatype “isbn”….
rdf:value “9783110413014”^^xyz:isbn
… and that may facilitate processing of the isbn string. But there is no such primitive datatype yet. However the statement “a bf:Isbn” would seem to serve that purpose.
My point being that wherever rdf:value occurs, though there may not be an explicit primitive datatype, the actual datatype is understood by context.
There are datatype properties in BIBFRAME where is makes sense to refine the datatype. Take bf:count or bf:date for example
Someone might declare:
bf:count “10”
and someone else declare:
bf:count “10”^^xs:int
Or
bf:date “June 20, 2016”
vs: bf:date “20160620”^^xdt:date
And in both cases the second form is going to be more easily processed.
But neither of these is supplied via rdf:value; they are datatype properties, for which rdf:value doesn’t apply.
Ray
From: Bibliographic Framework Transition Initiative Forum [mailto:[log in to unmask]<mailto:[log in to unmask]>] On Behalf Of Joseph Kiegel
Sent: Monday, June 20, 2016 1:18 PM
To: [log in to unmask]<mailto:[log in to unmask]>
Subject: Re: [BIBFRAME] FW: [BIBFRAME] rdf:value
I agree.
It seems that the object of rdf:value should have a datatype. A good basis for a list of datatypes is the table in RDF Semantics (http://www.w3.org/TR/2004/REC-rdf-mt-20040210/#DTYPEINTERP). These types are widely understood. Of course, local types can be established but they make widespread sharing of data more difficult.
Looked at from this point of view, only one case from the examples of rdf:value in the BIBFRAME specifications fits an xsd datatype: ISBNs are integers. The rest do not conform to a standard datatype.
From: Bibliographic Framework Transition Initiative Forum [mailto:[log in to unmask]] On Behalf Of Fallgren, Nancy (NIH/NLM) [E]
Sent: Monday, June 20, 2016 9:24 AM
To: [log in to unmask]<mailto:[log in to unmask]>
Subject: Re: [BIBFRAME] FW: [BIBFRAME] rdf:value
At NLM, we’ve been asking the same question as Joe in re use of rdf:value v. rdfs:label in the BF 2.0 Item examples. The use of rdf:value with a text string or with common terminology for which there should probably be a URI doesn’t make sense to us either.
It’s pretty clear that W3C defines rdf:value as a ‘structured’ value while rdfs:label is for a human readable label. But the W3C definition of rdf:value as an idiom with no meaning on its own, seems to indicate that it needs to be used within some context. The W3C example in the Primer https://www.w3.org/TR/2004/REC-rdf-primer-20040210/#rdfvalue implies that it should have a datatype (which makes sense for a machine to understand a structured value) as well as another property giving context about the structured value. So, if LC shelf mark has a structured/standard datatype that can be interpreted by machines as an LC Shelf mark, then use of rdf:value could make sense in that context; otherwise, it seems rdfs:label would be preferable.
Also, best practices for sharing LD should probably not entail local interpretation of properties from another vocabulary.
-Nancy
Nancy J. Fallgren
Metadata Specialist Librarian
Cataloging and Metadata Management Section
Technical Services Division
National Library of Medicine
[log in to unmask]<mailto:[log in to unmask]>
From: Hubay Miklós [mailto:[log in to unmask]]
Sent: Monday, June 20, 2016 11:46 AM
To: [log in to unmask]<mailto:[log in to unmask]>
Subject: Re: [BIBFRAME] FW: [BIBFRAME] rdf:value
Imho, the two properties are different. One is for value-declaration, and the other one is "may be used to provide a human-readable version of a resource's name."
https://www.w3.org/TR/rdf-schema/
2016.06.20. 17:34 keltezéssel, Joseph Kiegel írta:
Sorry, I meant rdfs:label.
From: Joseph Kiegel
Sent: Monday, June 20, 2016 8:34 AM
To: 'Bibliographic Framework Transition Initiative Forum' <[log in to unmask]><mailto:[log in to unmask]>
Subject: RE: [BIBFRAME] rdf:value
So is rdfs:value. The question is: what is the “appropriate” difference between the two?
From: Bibliographic Framework Transition Initiative Forum [mailto:[log in to unmask]] On Behalf Of Robert Sanderson
Sent: Monday, June 20, 2016 8:26 AM
To: [log in to unmask]<mailto:[log in to unmask]>
Subject: Re: [BIBFRAME] rdf:value
It's the value of the resource to which it's attached.
On Mon, Jun 20, 2016 at 5:18 PM, Joseph Kiegel <[log in to unmask]<mailto:[log in to unmask]>> wrote:
bf:identifiedBy [ a bf:Isbn
rdf:value “9783110413014” ] .
Example 2
bf:identifiedBy [ a identifier:ABC ;
rdf:value “MX3-387” ] .
Example 3
bf:identifiedBy [ a bf:Identifier ;
bf:source “xyz” ;
rdf:value “1234567890” ] .
There is an ISBN, and its value is 9783...
There is an ABC identifier, and its value is MX3-387
There is an untyped identifier from source system xyz, and it's value is 123...
Notes
Example 3
bf:baseMaterial [
bf:code [ rdf:value “o” ;
bf:source [rdf:value “marc007ng04” ] ] ;
bf:note [ a bf:Note ;
rdfs:label “Image printed on thick gold paper.” ] ] .
There is an untyped resource, which one imagines is a Code, with value "o".
There is an untyped resource, which is some sort of Source, with value "marc007..."
Item
Example (truncated)
<http://bibframe.example.org/item/itemZ>
bf:shelfMarkLcc [rdf:value “LB2395.C65 1991” ] ;
bf:usageAndAccessPolicy [
a bf:AccessPolicy ;
rdf:value “unrestricted” ] .
There is an LCC, and its value is LB...
There is a Policy and its value is "unrestricted"
Note -- this use is not very machine friendly. A better model would have identifiable policies, with their own URIs.
HTH,
Rob
--
Rob Sanderson
Semantic Architect
The Getty Trust
Los Angeles, CA 90049
--
Hubay Miklós
tájékoztató könyvtáros, könyvtárirendszer-adminisztrátor, MTMT-adminisztrátor
Széchenyi István Egyetem Egyetemi Könyvtár
9026 Győr, Egyetem tér 1.
Tel.: 96/613-443
email: [log in to unmask]<mailto:[log in to unmask]>
