> I want to learn more about what is meant by "logic" features A basic quad matrix decoder provides only about 3dB channel separation between certain channel pairs; Left Front - Left Rear Right Front - Right Rear Left Front - Right Rear Right Front - Left Rear The channel separation is reasonably good only between the two front channels and between the two rear channels. It is practically the same as the sound carrier, LP, tape... To enhance the channel separation subjectively, so called "logic decoders" were developed. They use gain riding at all decoder outputs. For example, if there is a higher level after the matrix decoding in the Front Right channel, that channel is boosted slightly and (in some decoders) all of the other three channels are damped down a bit. There are certain time constants for the gain changes. All four outputs have a similar gain riding system. The system is tracking all the time the matrix output levels and does the gain riding dynamically as the music changes. As a result, the listener subjectively hears a better channel separation between all of the four channels than what a matrix decoder as such can provide. I'm not sure if you'd be happy to do the same with two channel stereo? In order to make two channel stereo sound "wider", or to make an impression that the sound is coming from two loudspeakers, you would ride the gain of the L and R mixer faders along with the music. Eero