Gary, yes U-He Satin will decode dbx--but I am not sure about dbx-II.
Satin has to call it something else, and I will have to look at the program
to see what they are calling it, but it is just dbx.

If Richard Hess sees this--what about dbx II, Richard?  Does U-He Stain
decode that?  I have not seen that.

As you know, live music recorded on cassettes is very often problematic!
 I have a good many important live concerts recorded on them with no other
source.  From a restoration viewpoint, cassettes can be real disasters, but
the Nak Dragon helps that.

I used dbx years ago but never for cassettes.  And you will recall that
there were LPs that were encoded with dbx.  You needed a decoder and they
never caught on much.

The problem with making recordings with dbx was always that there could be
a bit of audible pumping.  Usually it wasn't a big deal, but it could be,
depending on what was being recorded-- whether the noise was being masked
by the content.  Dolby B and C were better in this regard (noise pumping),
when they were working right.  Dolby NR was not nearly compatible enough
from one machine to the next.  dbx was thought to be better with respect to
compatibility.  At least that was the common belief at the time.

You may recall that when VHS machines with the matrixed Hi-Fi sound (as
opposed to the mono edgetrack) first became available, they were very good
to use as just tape recorders for music, although you needed a machine with
defeatable automatic level control (ALC).  You could copy CD's, which were
still fairly new then, and the results were fairly close to the sound of
the CD, with great frequency response and dynamic range.  I was always told
that the noise reduction used to get that good result was nothing but dbx,
although they called it something different.  It worked very well for VHS
tapes, at all three speeds.  As I recall the sound was FM modulated.

The advent of digital recordings caused all of these various noise
reduction complications to vanish.  That is all fine with me--they are not


John Haley

On Sun, Jun 3, 2018 at 3:20 PM, Gary A. Galo <[log in to unmask]> wrote:

> Hi John,
> Sounds like you're making the best of a BAAAD situation (which cassettes
> invariably are). Have you dubbed any cassettes with dbx II  noise
> reduction? In my view, dbx II was a huge mistake for cassettes. dbx was
> very sensitive to errors in playback frequency response. Cassettes made
> with dbx II would often sound fine played back on the same machine they
> were recorded on. But, when you moved them to another playback machine,
> they would pump and breathe and otherwise sound lousy. Does U-He Satin do
> dbx NR? If so, how well does it work?
> dbx I was made for fast speed reel-to-reel recording - usually 15-ips. It
> extended the high-frequency boosts in record up to the top end of the
> audible spectrum, so accurate machine alignment was necessary for proper
> high-frequency tracking in playback. I used it successfully at 7.5-ips, but
> you had to really make sure your machine was properly aligned.
> dbx II was intended for slower-speed reel-to-reel recording, usually
> 7.5-ips, and it would work OK at 3.75. The HF boost in record was limited
> to, as I recall, around 10 kHz, so it wasn't as sensitive to high-frequency
> alignment in playback; it more forgiving of frequency response errors in
> the top octave. But, it was never intended for cassettes, and should never
> have been used on them.
> Best,
> Gary
> ____________________________
> Gary Galo
> Audio Engineer Emeritus
> The Crane School of Music
> SUNY at Potsdam, NY 13676
> "Great art presupposes the alert mind of the educated listener."
> Arnold Schoenberg
> "A true artist doesn't want to be admired, he wants to be believed."
> Igor Markevitch
> -----Original Message-----
> From: Association for Recorded Sound Discussion List [mailto:
> [log in to unmask]] On Behalf Of John Haley
> Sent: Sunday, June 03, 2018 3:05 PM
> To: [log in to unmask]
> Subject: Re: [ARSCLIST] question about baking cassette tapes
> I second the suggestion of getting a NAK Dragon for serious dubbing of
> cassettes.  I bought one a few months ago, and it has completely changed
> what I can get out of a lousy old cassette (which refers to most of them).
> And I used a nice TASCAM deck before that.  I could adjust the azimuth on
> the TASCAM and always did that, but it's not much fun.  Adjusting the
> azimuth is essential for music cassettes.
> I really love using the NAK Dragon.  It will play cassettes that won't play
> on other machines--the double capstan system is great.  In many older
> cassettes, the foam pressure pad that is supposed to press the tape against
> the head has fallen off--that's no problem in the Dragon.
> The Dragon has one drawback--no speed control.  If a cassette is off pitch
> (and plenty of them are--the old machines, even expensive ones, were
> notoriously inexact on the speed, which matters a lot for a tape that is
> moving at only 1 7/8 IPS), and if that cassette is also Dolbyized, you need
> to dub it with Dolby off, correct the pitch on the computer in the digital
> domain, and then apply Dolby NR with software.  U-He Satin is a good
> program choice for doing that.
> Best,
> John Haley
> On Sun, Jun 3, 2018 at 12:14 PM, Dan Gediman <[log in to unmask]> wrote:
> > Folks,
> >
> > I can’t thank you all enough for your thorough and very helpful
> > suggestions about dealing with cassette tapes. I am reassured that old
> > cassettes generally have fewer problems than RTR tapes of the same
> vintage.
> > It seems like having a playback deck with an azimuth adjustment and some
> > empty shells available to rehouse troublesome tapes are the most
> important.
> > My primary deck is a portable Sony D5M which I used for years as my main
> > deck for field recording, and have generally used it to play back tapes I
> > have recorded. I also have another Sony deck in my studio. But I am
> > entirely open to investing in one of the Nakamichi decks that have been
> > suggested for both the dual capstan and azimuth adjustment.
> >
> > Thanks again for all your good counsel!
> >
> > Best,
> > Dan
> >
> > Dan Gediman
> > [log in to unmask]
> > 502.299.2565
> >
> > > On Jun 3, 2018, at 12:00 AM, ARSCLIST automatic digest system <
> > [log in to unmask]> wrote:
> > >
> > > There is 1 message totaling 19 lines in this issue.
> > >
> > > Topics of the day:
> > >
> > >  1. Question about baking cassette audio tapes
> > >
> > > ----------------------------------------------------------------------
> > >
> > > Date:    Sat, 2 Jun 2018 00:28:11 -0400
> > > From:    Jeff Willens <[log in to unmask]>
> > > Subject: Re: Question about baking cassette audio tapes
> > >
> > > What Peter said.
> > >
> > > There are a very few brands of cassettes that do indeed shed, and can
> > benefit from a limited amount of baking time. I’m dealing with several
> > boxes of them right now. But before doing that, I would check to see if
> > rehousing them in new shells would help first. These tapes did not
> squeal.
> > They just flat out didn’t move. Some needed a better tape path. Some
> needed
> > baking. But itis generally less common than for RTR tapes.
> > >
> > > ------------------------------
> > >
> > > End of ARSCLIST Digest - 1 Jun 2018 to 2 Jun 2018 (#2018-116)
> > > *************************************************************
> >