Print

Print


this all sounds very sexy or it's my dirty mind?
F

On Mon, May 27, 2019 at 12:04 AM Richard L. Hess <[log in to unmask]>
wrote:

> Hi, All,
>
> I am working on a multi-tape project done in 1/4-track and I had cobbled
> together a quarter track assembly for an A80. I was adjusting the
> azimuth when sproing--the screw stripped out. I had another A80 head
> block I got when i purchased my load that had the same issue. The hole
> can be drilled out and threaded and have a screw insert put in, so it's
> repairable, but I don't have time or the parts to do it right now. So I
> looked for another solution and thought I'd mention this issue.
>
> When I put together another Sony APR-5000 quarter track head block, to
> continue this project, I noticed the azimuth screw was very stiff, so I
> pulled it out and lubricated it with a few drops of Kluber Constant GLY
> 2100 lithium soap -- what Studer used in their late model capstan motors
> and my go-to lubricant for mechanical linkages.
>
> Works like an absolute charm now!
>
> Cheers,
>
> Richard
>
> --
> Richard L. Hess                   email: [log in to unmask]
> Aurora, Ontario, Canada                             647 479 2800
> http://www.richardhess.com/tape/contact.htm
> Quality tape transfers -- even from hard-to-play tapes.
>


-- 
inviato dal mio pulsatore a bassa cutena
Francesco Martinelli
Lungarno Mediceo 10
56127 P I S A   I T A L Y
+39 335 5617207