I have extra copies of the following publications available to other government libraries only.  All are available online.  If you would like one of these paper copies please contact me at [log in to unmask] by August 28, 2019.

Report no.

4

Title

The problem of the helicopter

Link

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930080811.pdf

127

Air propeller, its strength and correct shape

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930080919.pdf

1325

Hydrodynamic impact loads in smooth water for a prismatic float having an angle of dead rise of 30 degrees

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930082110.pdf

1300

Effects of aerodynamic heating and heat transfer on the surface temperature of a body of revolution in steady supersonic flight

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930081923.pdf

1335

Local buckling strength of lipped Z-columns with small lip width

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930081960.pdf

1358

Propeller-loudness charts for light airplanes

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930081983.pdf

1361

Deformation analysis of wing structures

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930081987.pdf

1363

Theoretical investigation of hydrodynamic impact loads on scalloped-bottom seaplanes and comparisons with experiment

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930081989.pdf

1469

Tensile, fatigue, and creep properties of forged aluminum alloys at temperatures up to 800 degrees F

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930082108.pdf

1553

Compressive strength of 24S-T aluminum-alloy flat panels with longitudinal formed hat-section stiffeners having four ratios of stiffener thickness to skin thickness

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930082356.pdf

1564

Methods of constructing charts for adjusting test results for the compressive strength of plates for differences in material properties

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930082370.pdf

1636

Determination of stresses in gas-turbine disks subjected to plastic flow and creep

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930082308.pdf

2243

Effect of cell shape on compressive strength of hexagonal honeycomb structures

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930082884.pdf

2084

Strength properties of rayon-mat honeycomb core materials

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930082794.pdf

2564

Properties of honeycomb cores as affected by fiber type, fiber orientation, resin type, and amount

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930083282.pdf

D-6703

Evaluation of the use of a singularity element in finite-element analyses of center-cracked plates

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19720011260.pdf

TM-984

The mechanical properties of wood of different moisture content within -200 degrees to +200 degrees C temperature range

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930081250.pdf

TM-785

Methods and formulas for calculating the strength of plate and shell constructions as used in airplane design

https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19930094632.pdf



Julie Blankenburg

National Forest Service Library

Forest Products Laboratory

One Gifford Pinchot Drive

Madison, WI  53726


Phone: 608-231-9491

Library catalog: https://maple.cybertoolsforlibraries.com/cgi-bin/CyberHTML?USDAFSHO