Hi Joe, I have Adobe Audition, DC 10.6, Pro Tools, Reaper, Samplitude & Sound Forge installed & I'm 'hands on' familiar with a few others. Too much software, too little time. ;-) CB Corey Bailey Audio Engineering www.baileyzone.net On 10/21/2020 2:24 PM, Joe Salerno wrote: > What other DAWs to you use, Bailey? > > Joe Salerno > > On 10/21/2020 12:40 PM, Corey Bailey wrote: >> I have found the "suggest" box in RX7 Advanced to be handy for a >> number of things. >> >> That said, I agree with Gary Galo that a phase meter in Izotope RX >> would be nice. Although I was introduced to RX as a plug-in (before >> RX had numbers), I now use it stand alone. I have given Izotope a >> number of what I thought were useful suggestions and, aside from a >> return email saying what a good suggestion it was, nothing has been >> implemented. I stopped sending suggestions. >> >> RX is only one of a half dozen, or so, DAW's that I use. >> >> CB >> >> Corey Bailey Audio Engineering >> www.baileyzone.net >> >> On 10/21/2020 9:35 AM, Lou Judson wrote: >>> An easier fix for RX azimuth is to run the “suggest” box on the >>> first few minutes, then run it in the suggested correction… >>> >>> BUT I use it comonnly with dynamic correction and have never had >>> this problem. I have RX7 adv. >>> <L> >>> Lou Judson >>> Intuitive Audio >>> 415-883-2689 >>> >>>> On Oct 21, 2020, at 9:07 AM, Gary A. Galo >>>> <[log in to unmask]> wrote: >>>> >>>> >>>> The "fix" is to clone the first band of the record, so it appears >>>> twice in the file. Once the azimuth corrector hits the repeat of >>>> that band, it's locked in and the entire side is fine.