Print

Print


Ben-They make artificial limbs and a lot of other things with a laser 
printer. I think a stylus assembly could be made that way. A 3D scanner 
could digitize the components of an existing stylus-Mickey

-----Original Message----- 
From: Benjamin Roth-Aroni
Sent: Saturday, January 30, 2021 5:39 PM
To: [log in to unmask]
Subject: Re: [ARSCLIST] VRII a necessary option

Hi Mickey,
Can a 3D printer produce such fine detail and precision?
That would be great.
Regards,
Ben


On Sat, Jan 30, 2021 at 7:05 PM Mickey Clark <[log in to unmask]> wrote:

> Ben- The mottled surface you can see on laminated discs is the problem.
> Using a stereo cartridge doesn't work so well if you have any vertical
> information.
> Something I have tried with the VRII is have the stylus a little lower -
> meaning that it doesn't have to be between the poles but just below them.
> It reduces the output a little if it is too much for a direct connection
> to
> the phono on an amplifier. I use a Heathkit WA P-2 preamp tube amp so it
> accepts the higher input level.
> I wonder if an assembly could be made with a 3D printer for the GE.-Mickey
>
> -----Original Message-----
> From: Benjamin Roth-Aroni
> Sent: Saturday, January 30, 2021 1:29 PM
> To: [log in to unmask]
> Subject: Re: [ARSCLIST] VRII a necessary option
>
> Hi Mickey
>
> Great idea!
>
> I've also noticed that certain records sound terrible when played with a
> stereo cartridge no matter which stylus I use.
> Then I tried the VRii and the RPJ-047 which also sounded better.  The VRII
> usually has a 2.5 mil and the RPJ-047 has a 3 mil.
> Some old Columbia records give a slight warped sound with a stereo
> cartridge, but not with either GE cartridcge.
>
> Regards,
> Ben
>
>
> On Sat, Jan 30, 2021 at 2:48 PM Mickey Clark <[log in to unmask]> wrote:
>
> > Hi-Benjamin Roth-Aroni I am finding that some records played with a
> stereo
> > cartridge are really noisy. When I try the same record with same size
> > stylus
> > on the VRII  the record tracks perfectly. I've run into this multiple
> > times
> > and the VRII is my go-to for difficult records.
> > I would like to suggest that a manufacturer re-think the stylus for this
> > cartridge and modernize it. A reliable self centering would be an
> > advantage.
> > The cartridges will still work a hundred years from now - I'd like to 
> > see
> > a
> > modernized stylus for this amazing cartridge. - Mickey Clark
> >
> >
> > Mickey Clark
> > 710 Westminster Avenue West
> > Penticton BC
> > Canada
> > 250-462-7881
> > V2A 1K8
> > http://mcproductions.ca
> > 1-250-462-7881
> >
>